Fluval 14539 Plant Spectrum LED Instruction Manual
- June 12, 2024
- FLUVAL
Table of Contents
Fluval 14539 Plant Spectrum LED
Product Components
IMPORTANT SAFETY INSTRUCTIONS
W ARNING – To guard against injury, basic safety precautions should be observed, including the following:
-
READ AND FOLLOW ALL SAFETY INSTRUCTIONS and all the important notices on the appliance before using. Failure to do so may result in loss of fish life and/or damage to this appliance.
-
DANGER – To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
A. I f the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source.
B. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet. If the appliance or any part of it falls into the water DO NOT reach for it. First unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is dropped or damaged in any manner. The power cord of this appliance cannot be replaced; if the cord is damaged, the appliance should be discarded. Never cut the cord.
D. T o avoid the possibility of the appliance plug or receptacle getting wet, position the appliance to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop” (see illustration) should be arranged by the user for the cord connecting appliance to a receptacle. “The drip loop” is that part of the cord below the level of the receptacle or the connector if an extension cord is used, to prevent water travelling along the cord and coming in contact with the receptacle. If the plug or receptacle does get wet, DO NOT unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in receptacle. -
This appliance is not intended for use by persons (including children) with significantly impaired physical or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should always be supervised to ensure that they do not play with the appliance.
-
To avoid injury, do not touch moving parts or hot parts.
-
CAUTION – Always unplug or disconnect all appliances in the aquarium from electricity supply before placing hands in water, before putting on or taking off parts and while the equipment is being installed, maintained or handled. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an appliance from an outlet when not in use.
-
Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO NOT IMMERSE.
-
Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating the appliance.
-
I f an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out by a qualified electrical installer.
-
The socket-outlet shall be installed near the equipment and shall be easily accessible.
-
ATTENTION: The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
-
ATTENTION: Do not stare at the operating light source.
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended that this manual is thoroughly read and understood. Failure to do so may result in damage to this product.
For full instruction manual and video on set up of Bluetooth® application, visit: fluvalaquatics.com/plantnano
INSTALLATION
Not for use on aquariums with top frames.
BASIC TROUBLE-SHOOTING
If the fixture does not work, ensure that all plugs and wires are firmly connected, ie: connection from fixture to transformer,and connection from transformer to electrical outlet.
MAINTENANCE:
Before any kind of maintenance, always disconnect electrical supply of the light fixture. For maximum LED performance, it is recommended that the fixture and the LED lens be cleaned on a weekly basis. Unplug transformer prior to cleaning the light fixture and remove from aquarium. Use both hands when manipulating this appliance. Wipe exposed surfaces carefully with a damp cloth to remove any dust or mineral deposits that may collect over time. Do not use detergents or harsh cleaners as it can damage the light fixture. Use Fluval LED Lens Cleaning Non-Aerosol Spray (A3969) to clean the LED portion of the light fixture. Make sure all surfaces are dry before re-connecting the transformer to the power source.
WARRANTY
3 YEAR LIMITED WARRANTY
Your Fluval Plant Nano LED is guaranteed for defective parts and workmanship for a period of 3 years from the date of purchase. This guarantee is valid with proof of purchase only. The guarantee is limited to repair or replacement only and does not cover consequential loss, loss or damage to livestock and personal property or damage to animate or inanimate objects, irrespective of the cause thereof. This guarantee is valid only under normal operating conditions for which the unit is intended. It excludes any damage caused by unreasonable use, negligence, improper installation, tampering, abuse or commercial use. The warranty does not cover wear and tear or parts which have not been adequately or correctly maintained. Failure of less than 5% of the total number of LEDS shall not be considered a defect under the terms of this warranty. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
FOR AUTHORIZED WARRANTY REPAIR SERVICE:
For Authorized Warranty Service please return (well packaged and by registered post) to the address below enclosing dated receipt and reason for return. If you have any queries or comments about the operation of this product, please let us try to help you before you return the product to your retailer. Most queries can be handled promptly with a phone call. When you call (or write), please have all relevant information such as model number, age of product, details of aquarium set-up, as well as the nature of the problem.
- CANADA: Consumer Repair, Rolf C. Hagen Inc., 20500 Trans Canada Hwy, Baie-D’Urfé, QC H9X 0A2
- U.S.A. : Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansfield, MA 02048
- UK: Rolf C. Hagen (UK) Ltd, Customer Service Department California Drive, Whitwood Ind Est., Castleford West Yorkshire WF10 5QH www.hagen-uk.custhelp.com
CALL US ON OUR TOLL-FREE NUMBER:
- CANADA ONLY: 1-800-554-2436 between 9:00 a.m. and 4:30 p.m. Eastern Standard Time.
Ask for Customer Service.
- U.S. ONLY : 1-800-724-2436 between 9:00 a.m. and 4:00 p.m. Eastern Standard Time.
- U.K. ONLY: Helpline Number 01977 521015. Between 9:00 AM and 5:00 PM, Monday to Thursday and 9:00 AM and 4:00 PM on Friday (excluding Bank Holidays).
RECYCLING:
This symbol bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. Check with your local Environmental Agency for possible disposal instructions or take to an official council registered refuse collection point. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.
FAQs
How do I program the 24-hour light cycle on the Fluval 14539 Plant Spectrum LED?
The Fluval 14539 Plant Spectrum LED offers programmable 24-hour light cycle settings, including sunrise, midday, sunset, and night. You can program these settings through the FluvalSmart App on your mobile device.
Can this LED light be used for various aquarium sizes, and how can it be adjusted?
Yes, the Fluval 14539 is fully adjustable in positioning (up/down, side-to- side, forward/backward), and it features an over-the-glass mounting design with a repositionable, secure grip. This flexibility allows it to be adapted to different aquarium sizes and shapes.
How does the H.T.E (High Thermal Efficiency) technology work in this LED light?
The new generation of H.T.E LEDs in Fluval 14539 functions at a higher operating temperature, which leads to improved long-term light output and spectral performance. This ensures efficient and effective lighting suitable for plant growth.
Is the Fluval 14539 Plant Spectrum LED waterproof, and how does it protect against water intrusion?
Yes, this LED light has an IP67 waterproof rating. The fully encased aluminum shell provides effective heat transfer and enhances protection against water intrusion and humidity. This ensures the longevity of the light in the aquatic environment.
What benefits are offered by the 120° illumination cast by each individual LED?
The 120° illumination cast by each individual LED ensures wider and uniform lighting without dead spots. This full coverage ensures that all areas of the aquarium receive ample lighting, promoting the growth of vibrant plants.
How does the new design contribute to a smaller carbon footprint?
The Fluval 14539 Plant Spectrum LED features a re-engineered aluminum frame that is 23% lighter than the previous generation. By reducing the overall weight, it leaves a smaller carbon footprint, contributing to environmental sustainability.
How does the 7500 K lighting spectrum benefit the plants in the aquarium?
The 7500 K lighting spectrum is designed to promote plant growth by providing a balanced full spectrum that replicates natural sunlight. This helps in growing bigger, more vibrant plants in your freshwater aquarium.
Can I control the color settings of the Fluval 14539 Plant Spectrum LED?
Yes, the Fluval 14539 Plant Spectrum LED offers six unique band waves for full-spectrum results, and it provides independent color control. This enables customization of lighting to suit your specific aquarium needs and preferences.
How does the over-the-glass mounting design work?
The over-the-glass mounting design of the Fluval 14539 Plant Spectrum LED allows for easy attachment to the edge of the aquarium glass. It is repositionable and comes with a secure grip, offering flexibility in positioning the light for optimal illumination and coverage.
What are the safety measures taken to protect the LED from water and humidity?
The Fluval 14539 Plant Spectrum LED features a fully encased aluminum shell that enhances heat transfer and offers improved protection against water intrusion and humidity. Additionally, the IP67 waterproof rating ensures that the light is protected from water splashes and moisture in the aquarium environment.
Can I control the Fluval 14539 Plant Spectrum LED without the FluvalSmart App?
The Fluval 14539 Plant Spectrum LED is designed to be operated exclusively via the FluvalSmart App on your mobile device. This app provides full control over the light settings, including the 24-hour light cycle, color control, and more.
How does the light's aluminum frame contribute to its functionality?
The aluminum frame is not only 23% lighter than the previous generation but also serves to enhance heat transfer, making it more thermally efficient. Its smooth construction adds to the aesthetic appeal and also offers protection against water and humidity.
Download this PDF Link:Fluval 14539 Plant Spectrum LED Instruction Manual