iottie Easy One Touch 5 Universal Car Mount Instruction Manual

June 12, 2024
iOttie

iottie Easy One Touch 5 Universal Car Mount

iottie Easy One Touch 5 Universal Car Mount-PRODUCT

Product Information

  • Depth: 6.5 inches / 16.5 cm
  • Width: 4.2 inches / 10.7 cm
  • Height: 4 inches / 10.2 cm
  • Weight: 7.2 ounces / 204 grams

Product Usage Instructions

  1. Ensure that the product is placed on a stable and flat surface.
  2. Connect the product to a power source, if required.
  3. If applicable, turn on the product using the power button.
  4. Follow the specific instructions provided in the user manual for any additional setup or configuration.
  5. To operate the product, use the designated buttons or controls as indicated in the user manual.
  6. Refer to the user manual for information on different modes or settings available and how to access them.
  7. When finished using the product, turn it off and disconnect it from the power source, if applicable.
  8. Clean the product according to the recommended guidelines mentioned in the user manual.
  9. Store the product in a safe and dry place when not in use.

Getting Started

For optimal mounting. please follow the detailed instructions within this manual when using the Easy One Touch 5. iOttie is not liable for possible damages due to product misuse.

Critical Information

  • The Dashboard Pad is mounted with a semi-permanent adhesive tape. Each pad is one-time use only. Once removed, it cannot be re-mounted.
  • When mounting, it is recommended that the surface & product be above 40° F.

Specification

ITEM

|

SPECIFICATIONS

---|---

DEPTH

|

6.5”

WIDTH

|

4.2”

HEIGHT

|

4”

WEIGHT

|

7.2 oz

Telescopic Arm extends from 5 inches to 8 inches.

iottie Easy One Touch 5 Universal Car Mount-FIG1

At a Glance

iottie Easy One Touch 5 Universal Car Mount-FIG2

Installation

Assembling the Mount

  • A. Connect the Mount Cradle with the Ball Joint.
  • B. Then, tighten the Cradle Knob.

iottie Easy One Touch 5 Universal Car Mount-FIG3

Selecting a Location
Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B).

Option A
Dashboard or Flat Surface Installation
Choose an area on a flat surface on the vehicle’s dashboard and wipe any dust or debris from the surface.

  1. Peel off the film on the dashboard pad & stick on the desired installation location.
  2. Peel off the protective film on the Suction Cup and press mount firmly onto the dashboard pad.
  3. Push Locking Lever down to engage suction.

iottie Easy One Touch 5 Universal Car Mount-FIG4
When removing the dash pad please use caution, we recommend removing slowly from the edge to avoid damage.

Option B
Windshield Installation or Curved Glass Installation
Choose a location on the windshield and wipe any dust or debris from the surface.
Not recommended to use the dashboard pad for windshield mounting.

  1. Peel off the protective film on the Suction Cup and press firmly onto the windshield.
  2. Push Locking Lever down to engage suction.

iottie Easy One Touch 5 Universal Car Mount-FIG5

Additional Information

  • To reuse Suction Cup. simply rinse under warm water and let air dry to restore tacky suction.
  • Magnetic Cord Organizer to keep your cord organized and out of the way.

iottie Easy One Touch 5 Universal Car Mount-FIG6

Using the Easy One Touch Mechanism

The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds.

Mounting

  1. Press the locking side arms in.
  2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact and hold the device during the driving journey.

Releasing

Press the locking side arms with one hand and retrieve the device.

iottie Easy One Touch 5 Universal Car Mount-FIG7

Adjusting the Mount

  1. Cradle Knob
    When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position.

  2. Foot Button
    Located at the back of Craddle. Push the button to re-position mounts foot. The Foot can be adjusted up and down to fit any size phone.

iottie Easy One Touch 5 Universal Car Mount-FIG8

  1. Telescopic Knob
    Located on top of Telescopic Arm, loosen to extend the arm, and tighten to secure distance.

  2. Pivot Knob
    Located on the side of the Mount Base, turning allows you to pivot telescopic arm. Tighten to secure position.

iottie Easy One Touch 5 Universal Car Mount-FIG9

If you love your iOttie product, let us know by leaving a review on line, or connect with us on our social platforms.

20W37th St

New York, NY 10018
U.S.A.

www.iottie.com
cs@iottie.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals