AUDIBAX Bubble 40 40W Bubble Machine User Manual

AUDIBAX Bubble 40 40W Bubble Machine

Product Information

The product is Bubble 40, a bubble machine that produces bubbles for entertainment purposes. It comes with a wireless remote control that has 4 buttons (A, B, C, and D). The machine operates using Bubble Liquid, which needs to be filled in the reservoir located at the front of the machine. It is important to follow the instructions provided in the manual to ensure proper usage and maintain the warranty. The machine should be handled with precautions to avoid fire and electrical shock. Repairs should onlybe done by a qualified technician to prevent electrical shock.

Product Usage Instructions

Installation

1. Place the Bubble 40 machine on a flat, level surface.
2. Fill the reservoir with Bubble Liquid. Ensure that you do not exceed the fill line, as it may damage the machine.
3. After usage, empty any remaining liquid from the reservoir to prevent damage.

Wireless Remote Control

The wireless remote control has 4 buttons: A, B, C, and D. To produce bubbles, press and hold one of the buttons. The machinewill continue producing bubbles as long as the button is pressed.
Please refer to the manual for further details and keep it for future reference.

IMPORTANT INSTRUCTION

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference

• The unit contains voltage carrying parts. Therefore do NOT open the housing.
• Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
• Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
• When unplugging the unit from a mains outlet, always pull the plug, never the lead.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
• To avoid fire and shock hazard, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
• During operation, the housing becomes very hot. Do not touch it during operation and immediately after.

INSTALLATION

Attention:

• Be sure that the bubble machine is positioned on a stable, non-slip surface.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Don’t put any objects on the bubble machine.
• Never connect the bubble machine to a dimmer or rheostat.
• Keep the housing of this bubble machine dry at all times.
• Do not spill water or other liquids into reservoir.
• Drain the reservoir before transporting or storing the product.
• Never drink bubble liquid or use it on the inside or outside of a human body. If fluid gets in contact with skin or eyes, rinse thoroughly with water and call a doctor immediately!
• Keep out of the reach of children.
• For indoor use only

FILLING RESERVOIR

• Step 1: Place the bubble machine on a flat level surface.
• Step 2: Fill the reservoir with Bubble Liquid (front of the machine). Make sure that you do not fill the reservoir above the fill line. Filling above the line will result in damage to the machine.
• Step 3: After the usage, please empty the remaining liquid to prevent damage as well.

WIRELESS REMOTE CONTROL

The wireless remote control have 4 buttons. Press one of the buttons (A,B,C or D) and the machine will produce bubbles as long as you press the button
Please read the manual before using the product

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>