AUDIBAX Detroit 1000 DSP PA System User Manual

**AUDIBAX Detroit 1000 DSP PA System User Manual

**

INSTRUCTION

Please read and keep all safety and use instructions. Important Safety Instructions Refer to the user manual for more information about your Detroit 1000 DSP

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.  Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have falleninto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

   This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.

 This symbol on the product means there are important operating and maintenance instructions in this guide.

 Contains small parts which may be a choking hazard. Not suitable for children under age 3.

 This product contains magnetic material. Consult your physician on whetherthis might affect your implantable medical device.

System Setup Connections and Controls

1. BT & TWS Indicator Light: Bluetooth mode /True Wireless Stereo mode.
2. Indicator Light: Power / Signal / Limit. T3. WS Button: Press once to enter True Wireless Stereo Bluetooth mode.
3. ON/OFF Button: Press once to connect a Bluetooth device or disconnect a paired Bluetooth device.
4. DSP Preset: There are three preset mode: Monitor / DJ / Live.
5. THRU Output: Balanced XLR connectors connected in parallel to the inputs to connect another device (e.g. another active speaker system).
6. Input: Balanced XLR input for getting signals from mixers or preamplifiers.
7. MIC/Line Select Button: Press down for Line level signal, press up for Microphone level signal.
8. SAT VOL: Satellite Volume Control.
9. SUB VOL: Subwoofer Volume Control.
10. SAT Out: Balanced Speakon connectors connected in parallel to the inputs to connect satellite.
11. SUB Out: Balanced XLR connectors connected in parallel to the inputs to connect subwoofer.
12. Power Switch: Turns unit on or o.
13. AC Input: Please Use AC input cable from the original manufacturer only.

Specifications

coil
Amplifier| Class-D amplifier
Audio / Power Input / Output| Top and bottom 4-pins-quick-insert with 4 core ( 2Core 24V / 2CoreSignal +/- )
Enclosure| PP Plastic
Grille| 1.0mm thickness metal grille without acoustic fabric
Dispersion (H               V)| 120° 30°
Package Measure| 19–1738 cm
Gross Weight| 2.1 kgs
Model No.| Detroit 1000 DSP-SUB
---|---
Type| 10″ active bass reflex
Frequency Response (-6dB)| 47 Hz – 200 Hz
Max. SPL (1m, free space)| 117 dB
Power Output (RMS)| 400W
Impedance| 4 Ohms
Transducer LF| 10″ subwoofer, 1.5″ voice coil
Amplifier| Class-D amplifier
DSP Module| 96 kHz, 24-bit DSP processor with preset modes: Monitor, DJ, Live
Protection| Short circuit overheating, over-current
Controls| Power On / Off switch, satellite level, subwoofer level, Line/Mic
switch, Bluetooth On / Off switch, TWS switch, reset switch, DSP modes
switch
Indicators| Power, signal, limit, bluetooth, reset
Audio Input / Output| Left / Right female and male XLR input, 1 XLR output, 1 Satellite
Speakon output
Power Input / Output| Speakon
Power Supply| 100-230W 60/50Hz
Enclosure| 15mm MDF with regular raindrop painting
Grille| 1.0mm thickness metal grille without acoustic fabric
M20 Stand Adaptor| Yes
Package Measure| 723748 cm
Gross Weight| 22 kgs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>