AUDIBAX CM508-BT Bluetooth Recessed Ceiling Speaker User Manual

AUDIBAX CM508-BT Bluetooth Recessed Ceiling Speaker User Manual

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid the fire and/or electrical shock. Repairs must only be carried out by qualified technician in order to avoid electrical shock. Keep the manual for future reference.

• Prior to suing the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
• The unit contains voltage carrying parts. Therefore do NOT open the housing.
• Do place metal objects or pour liquids into the unit this may cause electrical shock and malfunction.
• Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the main lead can cause electrical shock and malfunction.
• When unplugging the unit from a mains outlet, always pull the plug, never the lead.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
• To avoid fire and shock hazard, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220-240VAC/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit the mains. The rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
• To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
• Do not repeatedly switch the fixture on and off. This shortens the life time.
• Keep the unit out of the reach of children. Do not leave the unit unattended.
• Do not use cleaning sprays to clean switches. The residues of these s sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
• Do not force the controls.
• This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60 cm away from computer or TV.

Specifications

| CM508-BT| CM608-BT| CM808-BT
---|---|---|---
Load Rating| 30W + 30W| 40W + 40W| 50W + 50W
Frequency Range| 100 Hz ~ 20 kHz| 70 Hz ~ 20 kHz| 50 Hz ~ 20 kHz
SPL(@1W/m)| 86dB| 88dB| 90dB
Woofer / Impedance| 5,25” / 8ohms| 6.5”/8 ohms| 8”/8 ohms
Tweeter| 1” silk dome| 1” silk dome| 1” silk dome
Diameter| Ø 214 mm| Ø 244 mm| Ø 284 mm
Install depth| 88.9 mm| 104.30 mm| 99 mm
Install dimension| 170 mm| 200 mm| 240 mm
Colour / Material| Black / ABS| Black / ABS| Black / ABS

Connecting with BT

Connecting your BT-device to the speaker follow below steps:

1. Turn on BT on your device
2. Search for “BT-SPEAKER”
3. Your device is now connected, no password needed

Disconnecting or Reconnecting

If you want to change from BT-device, follow bellow steps:

1. Disconnect the current BT-device (“OFF”)
2. Connect new BT-device by following above steps

If you move out of range or turn off the BT function on your BT-device, the BT if the speaker will disconnect. To reconnect turn on the BT on the desired device, it will reconnect.

• This unit is with built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
• If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
• If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
• Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
• Keep away from electronic equipment that may cause interference.
• Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
• Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before and cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged with people walk on it. Check the mains lead before every use for damages and faults!
• The mains voltage is 220-240V AC/ 50Hz. Check if power outlet match. If you travel is suitable for this unit

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit.

They would invalidate the CE certificate and their guarantee

Note : To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric product must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other specifications can be change without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any change to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages cause by inappropriate use or disrespect of the warning, contained in this manual.

Power AUDIBAX cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warning. This is also applicable to all damages in whatever form.

Installation of the CM508-BT / CM608-BT / CM808-BT

1. Drill a hole in the ceiling, big enough to fit the speaker:
   Model| Install dimension
   ---|---
   CM508-BT| Ø170 mm
   CM608-BT| Ø 200 mm
   CM808-BT0| Ø 240 mm

2. Connect the Active speaker with the 12V DC plug (See picture)

3. Connect Active and Passive speaker with speaker cable (+/—) (see picture)
   

4. Insert the speaker in the hole

5. Screw down each of the two screws (the locking tabs will swivel into the rear surface) Place the metal grill

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>