AUDIBAX IOWA 70 Disco Wash Moving Head Professional Mobile Projector User Manual

: June 12, 2024
: AUDIBAX

Table of Contents

AUDIBAX IOWA 70 Disco Wash Moving Head Professional Mobile Projector
Product Information
Product Usage Instructions
DATA SHEET
WELCOME TO AUDIBAX
SAFETY INSTRUCTIONS
PACKAGE CONTENT
PRODUCT DESCRIPTION
CONTROL PANEL INSTRUCTION
OPERATION INSTRUCTION
Channels mode
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AUDIBAX IOWA 70 Disco Wash Moving Head Professional Mobile Projector

Product Information

The product is called IOWA 70 and is manufactured by Audibax. It is a lighting fixture designed for use in event technology. The fixture features DMX technology, stand-alone mode, master/slave operation, RGBW color mixing, strobe effects, and pan & tilt functionality. It is also equipped with a green solution.

Product Usage Instructions

Safety Instructions:

Ensure that the power outlet matches the specifications of the equipment.
If the equipment has a voltage selector, only connect it to the power outlet if the values match.
Qualified personnel should regularly clean and service the equipment to prevent damage and overheating.

Important Information:

Avoid looking directly at the light beam, even for a short period of time.
Do not use optical instruments, such as magnifiers, to look directly at the beam.
If you are sensitive to strobe effects or have epilepsy, avoid places where strobe lights are being used.

Product Controls and Settings:

Channel 1: Control the X-axis movement.
Channel 2: Control the Y-axis movement.
Channel 3: Master control.
Channel 8: Adjust the speed of the XY motor movement.
Channel 9: Reset the fixture (range: 150-200).

Please refer to the user manual for detailed instructions on setting up and operating the IOWA 70 fixture. For further information, visit the Audibax website at www.audibax.com.

DATA SHEET

Brand: Audibax
Product Name: Iowa 70
ID: 10107900
EAN: 656272570002
Category: Lighting Moving Heads
Lamp Type: Led
Power: 100W
Number of LEDs: 7
Power Per LED: 8W
Color Mix: RGBW
Motorized Zoom: No
Exterior Use: No
Housing Color: Black
Motorized Zoom: No
Battery Operation: No
Connections: 3 Pin XLR
Motorized Focus: No
Wireless Control: No
Remote Control: No
DMX control: Yes
Color Temperature: 6500 K
Opening Angle: 36º
Effect: No
Control by App: No
Height: 24.50 cm
Width: 18 cm
Depth: 17.63 cm
Weight: 3kg

WELCOME TO AUDIBAX

Thank you very much for choosing Audibax. We hope you enjoy your new product. It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality. We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.
Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.co.

SAFETY INSTRUCTIONS

GENERAL INFORMATION

It is important to read and follow the instructions carefully.
Keep all information and instructions in a secure location.
Always follow the instructions provided.
Take note of all safety warnings and never remove them from the equipment.
Use the equipment only as intended and for its intended purpose.
Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
When installing the equipment, be sure to observe the relevant safety regulations in your country.
Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
Do not place sources of ignition, such as burning candles, on the equipment.
Keep ventilation slits unobstructed.
For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
Prevent objects from falling into the equipment.
Use the equipment only with recommended accessories intended by the manufacturer.
Do not attempt to open or modify the equipment.
Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
During transport, take steps to prevent the equipment from falling and causing damage or injury.
If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
Clean the equipment with a dry cloth.
Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

ATTENTION: If your equipment has a power cord with a grounding plug, it must be
connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.
Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
Avoid frequently turning the equipment on and off, as this can reduce its useful life.
IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
Only install the equipment when it is disconnected from the power source.
To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog. If the product contains the following symbols, please, read carefully:

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION
WARNING! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS

This product is specifically designed for use in event technology and is not intended to be used as household lighting.
It is important to avoid looking directly at the light beam, even for a short period of time.
Optical instruments, such as magnifiers, should not be used to look directly at the beam.
If you are sensitive to strobe effects, it is possible that they could cause an epileptic seizure. If you have epilepsy, it is important to avoid places where strobe lights are being used.

PACKAGE CONTENT

1 x Iowa 70
1 x Power cable
1 x Handle
2 x Screw
1 x User’s manual

PRODUCT DESCRIPTION

Light Source: 7*8W 4-in-1 Led (RGBW)
PowerSupply: 100-240V/50-60HZ
Rated Power: 100W
ControlMode: Auto/Sound/DMX/Master-slave
DMX Channel: 9/14
Product Size: 175175235mm
N.W. / G.W: 2.7 / 3.5kg

CONTROL PANEL INSTRUCTION

[ MODE/ESC ] Used to initially access the control panel
system, and also navigate to the previous higher-level
menu item.

UP ] Scrolls through menu items and numbers in ascending order.
[ DOWN ] Scrolls through menu items and numbers in descending order.

ENTER ] Used to select and confirm/store the current selection.

OPERATION INSTRUCTION

Channels mode

Channel	Function
1	0-255
2	0-255
3	0-255
4	0-255
5	0-255

6

11

13

Channels mode

Channel	Function
1	X Axis
2	Y Axis

3

|

Master Control

Motor Rotating Setting

Remark: When the operation mode is chosen, press the Enter button to run.

DISPOSAL

Packaging:

The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
Please follow all the disposal laws and regulations in your country.
As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.