Audibax Denver 12 PA Active Speaker with Battery and Wheels User Manual

USER’S MANUAL DENVER 12/DENVER 15
PA Active Speaker with Battery and Wheels

DATA SHEET

WELCOME TO AUDIBAX

Thank you very much for choosing Audibax. We hope you enjoy your new product.
It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.
We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.
Please read carefully this manual in order to use your Audibax product in the best way.
Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

• It is important to read and follow the instructions carefully.
• Keep all information and instructions in a secure location.
• Always follow the instructions provided.
• Take note of all safety warnings and never remove them from the equipment.
• Use the equipment only as intended and for its intended purpose.
• Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
• When installing the equipment, be sure to observe the relevant safety regulations in your country.
• Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
• Do not place sources of ignition, such as burning candles, on the equipment.
• Keep ventilation slits unobstructed.
• For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
• Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
• Prevent objects from falling into the equipment.
• Use the equipment only with recommended accessories intended by the manufacturer.
• Do not attempt to open or modify the equipment.
• Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
• During transport, take steps to prevent the equipment from falling and causing damage or injury.
• If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should  repair the equipment.
• Clean the equipment with a dry cloth.
• Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
• Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

• ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
• If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
• Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values  match. If the power cord or adapter does not fit your outlet, contact an electrician.
• Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
• Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the  cord or adapter with wet hands.
• Avoid frequently turning the equipment on and off, as this can reduce its useful life.
• IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
• To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
• If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
• Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
• Only install the equipment when it is disconnected from the power source.
• To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.
  If the product contains the following symbols, please, read carefully:

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use must comply with the applicable national rules and regulations for accident prevention.
As the manufacturer of this product, Audibax has the responsibility to inform you about the potential health risks associated with its use. One such risk is hearing damage caused by prolonged exposure to high volume.
When this product is in use, it can generate high sound-pressure levels that may cause irreversible hearing damage to performers, employees, and audience members.
To prevent this, it is important to avoid exposing yourself or others to volumes exceeding 90 dB for an extended period of time.

PACKAGE CONTENT

• 1 x Denver 12 / Denver 15
• 1 x Remote Control
• 2 x Wireless VHF Mics
• 1 x User´s Manual

PRODUCT DESCRIPTION

remote control, Bluetooth, USB/SD
Power| 250 W RMS-500 W PEAK| 700 W
N.W| | 13.50KG
G.W| | 14.70KG
Package size| | 482x395x7S0mm

PANEL CONTROL INSTRUCTIONS

1. MIC IN (1/4″ jack &XLR) Mic signal input.

2. Line in (XLR& RCA) Line signal input.

3. Line out (1/4″ jack & XLR)
   Audio general (Master) output to output signal to another active speaker box or amplifier.

4. Mic Vol
   Mic output level adjustment.

5. ECHO
   Echo effect output level adjustment.

6. MP3 Vol
   MP3 Player output level adjustment

7. EQ
   Treble : This knob is used to adjust the volume of high frequency Bass : This knob is used to adjust the volume of low frequency

8. Master Vol
   General (Master) output level adjustment.

9. Power & Clip Indicator
   Power Indicator : This indicator is a symbol of power on / off
   Clip : This indicator is a symbol of signal , when the signal is too much , clip indicator will illuminate and please turn down the volume.

10. ANT
    ANT A is used to receive signal from VHF A ANT B is used to receive signal from VHF B.

11. VOL A & VOL B
    VOL A is used to adjust the volume of VHF A microphone VOL B is used to adjust the of VHF B microphone

12. VHF POWER
    Turn on / off the VHF POWER

13. DC 12 V IN
    This is to connect to DC12V power supply to get electrical power

14. Battery Status Indicator
    These indicators are shown the status of the battery , when the yellow indicator is lighted, please charge the battery right away ; When the red indicator is lighted ,please switch off , otherwise , the product will generate noise

15. Power switch
    Turn on / off the product

16. AC socket and fuse holder
    AC Socket: Plug in power cable to get AC power supply
    Fuse holder : Please replace the fuse with correct specification

17. MP3 Player instruction
    (1).USB/SD Connector: A USB/SD Connector for auxiliary signal input and Mp3 player.
    (2).Play/Pause Button: Press to boot or pause playback of files on USB flash drives/SD/MMC. If you are in FM Radio mode, pressing the seek button to search stations and store them in memory
    (3).Stop Buttoon: This button stops playback of USB drives / SD/ MMC/BLUETOOTH
    (4). MODE: Press this button to choose FM/BLUETOOTH /USB/SD status for signal. Bluetooth name on the phone : ZY-BT1
    (5). Reverse Button: Press in playback mode USB Drive/SD/M MC to return to the previous song, if you press and hold back the song playing. In FM mode returns to the previous station. This button is also used to set the date, time, alarm and sleep timer.
    (6). Forward Button: Press in the playback mode USB Drive/SD/M MC to advance to the next song, if you hold down the button advances the currently playing song. In FM mode jumps to the next station. This button is also used to  set the date, time, alarm and sleep timer

DISPOSAL

Packaging:

1. The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
2. Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

1. This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an  approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
2. Please follow all the disposal laws and regulations in your country.
3. As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

www.audibax.com

References

• Home - Audibax

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>