TOOLCRAFT ASP-226 Vacuum Pipette Instruction Manual

: June 12, 2024
: Toolcraft

Table of Contents

Intended use
Delivery content
Latest product information
Description of symbols
Safety instructions
Operation
Cleaning and care
Technical data

TOOLCRAFT ASP-226 Vacuum Pipette

Intended use

This product is designed for the careful handling of small parts such as electronic components.
Using the product for purposes other than those described above may damage the product.
Improper use can cause damage to property or other hazards.
This product complies with statutory, national and European regulations. For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners. All rights reserved.

Delivery content

Vacuum pipette
1 x suction nozzle, straight design
1 x suction nozzle, curved design
2 x suction cup ø 3 mm
2 x suction cup ø 7 mm
2 x suction cup ø 10 mm
Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

The symbol warns of hazards that can lead to personal injury

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

This device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist repair centre.

Handling

Handle the product carefully. Impact, shocks or a fall even from a low height can damage the product.

Operating environment

Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours, and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.

Electrostatic discharges

Electrostatic discharges can damage electronic components. Take precautionary measures against electrostatic discharge before commencing work.

Operation

If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions, or
- has been subjected to any serious transport-related stress.

Product overview

Vacuum button
Suction nozzle, curved design
Suction cup
Suction nozzle, straight design (spare part)
Interchangeable suction cups (spare parts)

Operation

Attaching the suction nozzle and suction cup

Before you can use the product, you must attach the desired suction nozzle and suction cup as follows:

Place the desired suction nozzle (2/4) on the vacuum pipette.
Slide the desired suction cup (3/5) onto the nozzle.
→ The product is now ready for use.

Lifting and releasing components

Follow the steps below to lift and release components:

Make sure that the surface of the component is clean and flat with no unevenness.
Place the vacuum pipette with the suction cup on the component.
Press the vacuum button (1) and then release it to suck the component.
Carefully move the component to the desired position.
Press the vacuum button (1) again to release the component.

Cleaning and care

Important:

Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions. These may damage the product or cause it to malfunction.
Do not immerse the product in water.

Remove the suction nozzle and suction cup from the product.
Use a damp, lint-free cloth to clean the individual parts.
Replace the suction nozzle and suction cup.

Technical data

Ambient conditions

Operating temperature …………………….0 to +40 °C
Operating humidity ………………………….<85 % RH
Storage temperature………………………..0 to +40 °C
Storage humidity……………………………..<85 % RH

Miscellaneous

Protection against ESD ……………………No

Dimensions

Vacuum pen (L x ø)……………………..132.2 x 12 mm
Straight nozzle (L)……………………….27 mm
Curved nozzle (L)………………………..29 mm
Net weight………………………………………21g
Gross weight…………………………………..34g

Customers Support

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.