BERTAZZONI HK36PROFDX Handle Kit for 36 Inch Built In French Door Refrigerator Installation Guide
- October 30, 2023
- Bertazzoni
Table of Contents
HK36PROFDX Handle Kit for 36 Inch Built In French Door
Refrigerator
Installation Guide
HK36PROFDX Handle Kit for 36 Inch Built In French Door Refrigerator
HANDLE INSTALLATION ON CUSTOM CABINETS
In case a custom cabinet panel is to be mounted on any of the models listed
below with Bertazzoni handles, it will be necessary to install brass tapping
inserts in order to secure the handle properly on the custom panel.
SUGGESTED HANDLE INSERT FOR PANELS – M5 x 0.8 MM BRASS TAPPING INSERTS
Recommended drill bit size to drill the pilot hole is 3/8″
Suitable inserts can be ordered at
www.encompassparts.com
Part Number: 95631A100, contains n°4 M5 brass hardwood inserts and 1 M5
installation bit
Do not use a power tool to mount the inserts. Installation of the inserts with
improperly calibrated power tools risk damaging the panels.
3070992-revA
Documents / Resources
|
BERTAZZONI HK36PROFDX Handle Kit for 36 Inch Built In French Door
Refrigerator
[pdf] Installation Guide
HK36PROFDX Handle Kit for 36 Inch Built In French Door Refrigerator,
HK36PROFDX, Handle Kit for 36 Inch Built In French Door Refrigerator
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>