KLIM Pods Wireless Earphones User Manual
- June 13, 2024
- KLIM
Table of Contents
KLIM PODS
USER MANUAL
SAFETY WARNINGS
- Don’t attempt to disassemble the unit and change any part by yourself.
- Don’t expose the product to any liquid, moisture or humidity.
- Don’t expose the earphones to extreme temperatures
- Don’t use the earphones near a fire source.
- Don’t store the unit in an electromagnetic interference environment to avoid any malfunction.
TECHNICAL SPECIFICATIONS
Earphones
BT Version: 5.3
Working Range: < 10 m
Battery: 40mAh
Playing time: ~6 hours (without ANC)
Charging time: ~ 1h30
Input: 5V – 40mA
Charging case
Battery: 300mAh
Charging time: ~2 hours
Input: 5V – 300mA
PRODUCT DIAGRAM & PACKAGE CONTENT
Package content
Earphone Charging case
User manual USB-C charging cable
Ear tips x 6
Product Diagram
- Multi Function buttons
- Earphones LED indicator
- Case LED indicator
- Charging Port (USB-C)
CONTROLS
Music playing mode
| Play/Pause | X 2 (L/R) |
|---|---|
| Previous Track | X 3 (L) |
| Next Track | X 3 (R) |
| Volume + | X 1 (R) |
| Volume – | X 1 (L) |
Hands-free mode
| Answer/End a call | X 2 (L/R) |
|---|---|
| Reject a call | Press 2 seconds and release (L/R) |
ANC Mode (Active Noise Cancellation)
Switch between ANC Off, ANC On and Transparency mode| Press 2 seconds and
release (R)
---|---
Voice assistant
| Open the Voice assistant | Press 2 seconds and release (L) |
|---|
QUICK USE GUIDE
Note: it is highly recommended to fully charge the earphones and the case before using the earphones for the first time. Refer to the section “charging” for more instructions.
(1) Open the case, the earphones will turn on automatically.
Note: If one or both earphones are off, simply press the multi function button for 3 seconds to turn them on.
(2) If the earphones were not already paired with a device, they will enter directly in pairing mode. Activate the Bluetooth on your device, then search and select “KLIM Pods” from the list of available BT devices.
Note: If a password is required, just type: 0000
(3) You’re ready to use the earphones, use the multi function button of each earphone to adjust the volume, jump to the next/previous tracks, answer/reject a call or switch between the different ANC modes.
(4) To turn off the earphones, simply put them back into the charging case, or press the multi function buttons for 6 seconds.
1 2
3 4
DETAILED OPERATING INSTRUCTIONS
Charging
Case
Connect the USB-C charging cable to a USB Port of your laptop/computer or
directly to a DC 5V adapter to charge the case.
Earphones
Simply put the earphones into the charging case, and they will start to charge
automatically.
Wearing
Insert the earphones into the inner canal of your ears and turn them gently until you find the most comfortable and secure position.
1 Insert 2 Twist and Lock
Pairing
- Open the case and take the earphones, they will automatically enter in pairing mode.
- Activate the Bluetooth on your device, then search and select “KLIM Pods” from the list of available devices.
Note: You can also take only one earphone (left or right) from the case
to pair it in single mode to your
phone/laptop.
1 2
Bluetooth connection reset
- Open the lid of the charging case and take the earbuds out. After that, a white light will turn on and the earbuds will turn on automatically.
- Press the multifunction touch button on any of the earbuds five times. A LED light will start flashing.
- When the light turns off, place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.
- After that, the reset process will be done.
Active Noise Cancellation Modes (ANC)
Press and hold for 2 seconds the multi function button of the right earphone to switch between the three ANC modes. A prompt voice will indicate the current mode selected.
ANC On: The ANC is turned on to reduce the environment noise around you and let you focus on your music/call only.
ANC Off: The ANC is turned off.
Transparency mode: The ANC is turned on, but external human voices are amplified to allow you to hear people around you.
LED Indicator status
Earphones LED indicator
Turned on: fixed white.
Pairing: flashing in blue and white alternatively.
Reset: flashing in white, then turns off when the reset is done.
Case LED indicator
Charging status (earphones): fixed green while charging, which turn off when fully charged.
Low battery (case): flashing green, which turn off when the battery is completely discharged.
Charging status (case): flashing white while charging, fixed white when fully charged.
CONTACT & TROUBLESHOOTING
Do you need additional assistance with your product? Contact us at support@klimtechnologies.com. Our team of specialists is at your disposal and will always reply within 24 hours!
Q: The earphones do not work.
A: Carry out the following instructions.
- Try charging the earphone that is not working or both, by placing them in the charging case.
- Try to reset the earphones
- Check if the earphones are not too far from the paired device
Q: The microphone does not work.
A: Check on your device if the microphone volume is correctly adjusted and not muted.
BUILT TOAST.
BUILT FOR YOU.
Marcus Excelsior Limited
2512 Longhorn Place Office Tower
8 Argyle Street, Mongkok, Kowloon
Hong Kong
Authorised UK representative
Marcus Excelsior LLP
71-75, Shelton Street, Covent Garden,
London, WC2H 9JQ, England
Authorised EU representative
Marcus Excelsior Limited
Bracken Road No 51, Carlisle Offices
018CV48 Dublin, Sandyford
Dublin, Ireland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>