SEGWAY P Series Ninebot Handlebar Extender User Manual
- June 12, 2024
- Segway
Table of Contents
SEGWAY P Series Ninebot Handlebar Extender
Packing list
Installation
Step 1
- Remove the rubber stoppers.
Step 2
- Place the extension bar on the handlebar and pre-tighten with screws and flat washers.
Step 3
- Adjust to the proper position and tighten all screws as illustrated.
Specifications
- Net weight/Poids net Approx. 1.8 lbs (800 g)
- Material High-strength steel (Acier a haute resistance) Q235A/SPCC
- Length x width/Longueur x largeur 26 x 7.4 inch (661 x 187 mm)
- Diameter 0.9 inch (22 mm)
- Compatible with/Compatible avec Segway KickScooter P65/Pl00S
4 After-sales Service
Warranty
- We offer 180 days warranty service for Segway Extension Bar purchased directly from Segway official on-line store and authorized channels. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser.
- THIS LIMITED WARRANTY DOES NOT IN ANY WAY AFFECT OR LIMIT THE STATUTORY RIGHTS YOU MAY HAVE AS A CONSUMER.
Customer Support
- For product issues, please contact Segway customer support in your region, Segway’s support personnel are available to assist you.
- The Americas:technicalsupport@segway.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>