Contour Design 3164535 RollerMouse RED Two-Handed Ergonomic Mouse User Guide

Contour Design 3164535 RollerMouse RED Two-Handed Ergonomic Mouse

What’s in the Box

1. RollerMouse Red Wireless
2. Wrist rest
3. Two short keyboard risers
4. Two long keyboard risers
5. Wrist rest removal key
6. Dongle
7. USB extender
8. USB charging cable

Please find accessories # 6,7,8 attached together in the box.

Functions

• A. Rollerbar
• B. Cursor speed and battery level indicator LED
• С. Сору
• D. Paste
• E. Left-click
• F. Right-click
• G. Scroll wheel
• H. “One Touch” double-click
• I. On-off Switch
• J. Dongle storage compartment

Quick Start

1. To connect via Bluetooth:
   • Power on RollerMouse (button I). On your computer, navigate to the area of settings regarding
   • Bluetooth connections. Select the option to add or discover a Bluetooth device.
   • Your RollerMouse will automatically be recognized, select it for the computer to start Bluetooth connection.
2. To connect via USB dongle:
   • Insert USB dongle into available USB port and power on your RollerMouse. Your computer will recognize your new device and connect automatically
3. To connect via a wired USB connection:
   • Connect USB cable to your RollerMouse and into an available USB port on your computer.
   • Your computer will recognize your new device and connect automatically.

Cursor Speed

Cursor Speed (DPI)

• Press the Cursor speed (button B) to cycle through cursor speeds.
• There are speed selections which range from slow (600 DPI) to fast (2800 DPI).
• Speed can be identified by the LED lights as shown. Hold Cursor speed (button B) for 8 seconds to default settings.

Battery

• Battery level is shown when the device is powered on or plugged in.
• If battery is below 20%, a single light will blink to indicate the need to charge the device.

Pairing and secondary options

1. Restart Bluetooth pairing:
   • Press button B. While continuing to hold B, press and release button E two times, then release button B.
2. Select Bluetooth-only connectivity:
   • Press button B. While continuing to hold B, press and release button E three times, then release button B.
3. Select dongle-only connectivity:
   • Press button B, while continuing to hold B, press and release button F three times, then release button B.
4. Restore pairing with dongle:
   • Unplug then re-plug the dongle to the unit to enable pairing. Hold the device close to dongle and press button B. While continuing to hold B, press and release button F two times, then release button B.
5. Reset wireless function to automatic pairing mode:
   • Press button B, While continuing to hold B, press and release button E, then release button B.

When the device is plugged with the USB cable, this connection overrides wireless connectivity.
Please visit contourdesign.com/BT for further information about Bluetooth.

Charging/Extension

To charge your RollerMouse remove the USB extender and dongle from the charging cable.
Plug the USB-C end into the RollerMouse and connect to a USB-A at your computer. Your RollerMouse will be fully charged in approx. 5 hours. You may continue to use the RollerMouse as it charges.

Once powered on, the device is in automatic mode which will pair to the first available connection. The device will attempt to connect to the dongle first. If no connection is made, the device will attempt to connect via Bluetooth using the pairing information that is already in the unit. If no pairing information is available, it will start Bluetooth pairing mode and remain in that pairing mode for about 3 minutes. If the device is left in automatic pairing mode, the RollerMouse will cycle through the above steps each time it’s powered off and then powered back on again.

Rollerbar click force adjustment

• Click force refers to the level of resistance when clicking the Rollerbar. To adjust click force, press and hold button B (Cursor speed) then press and release button A (Rollerbar).
• Move button G (Scroll wheel) up and down to adjust the click force settings.
• To disable the Rollerbar click function, adjust the click tension until all LEDs are illuminated.

Rollerbar click volume adjustment

• The Rollerbar has 6 different click volume settings. To change the click volume, press and hold button B (Cursor speed), while continuing to hold B (Cursor speed), press and release button G (Scroll wheel), the LED light will show current click volume setting. Move button G (Scroll wheel) up/down to adjust volume setting. Release button B to confirm adjusted click volume.
• To disable the Rollerbar click volume, adjust the click volume until alle LEDs are illuminated.

Keyboard Risers

• Before using your RollerMouse, take a moment and adjust the keyboard risers to achieve the desired keyboard height and angle.
• For a proper ergonomic position, the front edge of the keyboard should be as close to the Rollerbar as possible.

Software Driver

All Contour’s ergonomic products are plug-and-play. If you want to customize your RollerMouse, we recommend downloading the free driver available at: https://contourdesign.com/drivers

Battery Disposal

Guarantee

2-year guarantee

• All Contour Design products come with a 2 year guarantee.

Product And Sales

Product Support

• For information on software drivers, product manuals, and advanced product settings such as thin client mode, please visit: contourdesign.com/support

Sales Support

If you have questions about your recent purchase, email us:

• United States: ergoinfo@contourdesign.com

• All other countries: support@contourdesign.com

• www.fsc.org

www.contourdesign.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>