Clore Automotive LNCPOD Light n Carry Quad Pod Adjustable Light Stand User Manual
- June 12, 2024
- Clore Automotive
Table of Contents
Clore Automotive LNCPOD Light n Carry Quad Pod Adjustable Light Stand
Product Information:
The Quad Pod Light Stand (Model No. LNCPOD) is designed to securely hold and
position light fixtures for various applications.
It features a locking mechanism for leg angle adjustment, height adjustment,
and the Clamp Grip Attachment. The Quad Pod is constructed with durable
materials to ensure stability and longevity.
It is important to note that this product contains chemicals, including VinylChloride, Styrene, and Acrylonitrile, which are known to the State of California to cause cancer. Please refer to the website www.P65Warnings.ca.gov for more information.
Product Usage Instructions
-
Before using the Quad Pod as a light stand, read the entire user manual and also refer to the instructions provided by the light fixture manufacturer for specific mounting requirements.
-
Familiarize yourself with the locking mechanism of the Quad Pod. It has two types of actions: a tighten/loosen action and a locking action.
-
To lock or unlock the mechanism, pull it back to release and cinch it down to lock. To adjust the locking strength, rotate it in the desired direction.
-
If you are using Light-N-Carry flood lights with strong magnets, it is recommended to secure the mounted lights to the bar using the included hardware or other methods to reduce the risk of dropping the light due to a hard shock.
-
When using the multi-light mounting bar, make sure not to overweight one side over the other, as it could increase the tipping hazard.
-
To increase stability during windy or destabilizing conditions, hang a sandbag or a similar ballast device from the leg support arms.
-
Avoid overloading the Quad Pod with excessive weight, as it may destabilize the stand.
-
After using the Quad Pod in wet, dusty, sandy, or salty conditions, always clean and dry it thoroughly. Avoid using the Quad Pod in or around saltwater.
-
To clean the Quad Pod, use a mild soap solution applied with a soft cloth. Rinse with fresh water and dry with a soft towel.
Remove any dust, dirt, or sand from the locking mechanisms, leg sections, and all moving parts. -
For warranty service, contact Technical Service at 913-310-1050 and keep your purchase receipt handy.
Note: Please refer to the complete owner’s manual for additional information, precautions, and warranty terms.
WARNING
Read these instructions completely before using the Quad Pod as a light
stand. Also, read the instructions for any light mounted on the stand to
understand the specific mounting requirements of such lights.
This product can expose you to chemicals, including Vinyl-Chloride, Styrene and Acrylonitrile, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the Quad Pod safely and effectively.
Please read and follow these instructions and precautions carefully. In the
rare event that your flood light contains a damaged or missing item, does not
perform as specified, or requires warranty service, please call Technical
Service at 913-310-1050. Save your
purchase receipt, it is required for warranty service.
WARNING
| Read these instructions completely before using the Quad Pod as a light
stand. Also, read the instructions for any light mounted on the stand to
understand the specific mounting requirements of such lights.
| • Always ensure that all locking mechanisms are tightly engaged before
mounting any gear on your Quad Pod.
• Improperly attached or poorly secured lights or other devices can fall and cause damage to property and physical injury. Always properly secure any attachment used with the Quad Pod.
| • Always ensure the Quad Pod is on a stable, level surface.
• Always fully extend Quad Pod legs for stability.
• Be extra cautious in windy conditions – place additional weight on Quad Pod center support as needed to maintain stability.
| • Ensure legs do not present a trip hazard – flag if necessary.
• Avoid leaving Quad Pod unattended in areas where people could trip over the gear and get hurt.
CONTENTS
Your Quad Pod Light Stand includes:
- Quad Pod
- Clamp Grip Attachment
- Multi-Light Mounting Bar Attachment
- Hardware for Multi-Light Mounting Bar Attachment
OPERATING INSTRUCTIONS
The Quad Pod utilizes a locking mechanism for leg angle adjustment, height adjustment and for the Clamp Grip Attachment. This mechanism has two types of actions: a tighten/loosen action and a locking action. To lock/unlock the mechanism, pull it back to release and cinch it down to lock. To tighten/loosen the locking strength of the mechanism, rotate it in the desired direction.
Leg Angle Adjustment – To adjust the leg angle of the Quad Pod, unlock the mechanism on the collar at the top of the legs and then slide the collar up to reduce the leg angle or down to increase the leg angle, remembering to lock the mechanism when the desired leg angle is reached.
Height Adjustment – To adjust the working height of the Quad Pod, unlock the mechanism on the top collar and slide the height control bar up or down as needed, remembering to lock the mechanism when the desired height is reached.
Clamp Grip Jaw Adjustment – The clamp grip jaw can be opened/closed by locking or unlocking the mechanism. When placing a light into the clamp grip, orient it to optimally conform to the grip dimension and then lock the mechanism to secure it in place. When gripping items of different diameters or thicknesses, the clamp grip may require adjustment to achieve a proper grip. As noted above, rotate the mechanism to tighten/loosen the grip opening to match the item to be mounted.
Clamp Grip Depth Adjustment – The clamp grip can be adjusted to move the gripped light (or bar – see below) closer or farther away from the Quad Pod. To adjust the distance, turn the adjustment knob counterclockwise to unlock the distance bar and push forward or backward as desired. Once the desired distance is achieved, turn the adjustment knob clockwise to lock the bar in place.
Multi-light Mounting Bar — Included with your Quad Pod is a bar intended to allow you to mount multiple lights to achieve higher levels of illumination than can be achieved with a single light. To utilize the bar, mount it into the clamp grip as noted above.
Note: While Light-N-Carryflood lights have very strong magnets, we recommend securing mounted lights to the bar using the included hardware or other methods to reduce the likelihood of dropping the light as a result of a hard shock.
Note: When using the multi-light mounting bar, take care not to overweight one side over the other, which could result in an increased tipping hazard.
INCREASING STABILITY USING A BALLAST DEVICE
To help stabilize the Quad Pod during windy or otherwise destabiliz- ing
conditions, hang a sandbag or similar ballast device from the leg support
arms.
Note: Take care not to overload the Quad Pod with excessive weight, as this could have an adverse effect and actually destabilize the Quad Pod.
MAINTENANCE
Always clean and dry the Quad Pod after it has been exposed to wet, dusty, sandy or salty conditions. Your Quad Pod is not recommended for use in or around salt water. If required, clean Quad Pod using a mild soap solution applied with a soft cloth, rinse with a fresh water and dry with soft towel. Remove any dust, dirt or sand from locking mecha- nisms, leg sections and all moving parts
LIMITED WARRANTY
Clore Automotive warrants this product to be free from defects in material or
workmanship for a period of 90 days from the date of original end user
purchase.
This warranty extends to each person who acquires lawful ownership within 90
days of the original retail purchase, but is void if the product has been
abused, altered, misused or improperly packaged and damaged when returned for
repair.
THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WARRANTY CONSTITUTE THE BUYER’S SOLE
AND EXCLUSIVE REMEDY.
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 90 DAYS FROM DATE OF
PURCHASE,ALL RISK OF LOSS FROM WHATEVER REASON SHALL BE PUT UPON THE
PURCHASER.
CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDENTAL
AND CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES:
CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL NEVER EXCEED
THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER LIABILITY IS
PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR IMPLIED), NEGLIGENCE, STRICT
TORT OR ANY OTHER THEORY.
Some states do not permit the limitation of warranties or limitation of consequential or incidental damages, so the above disclaimer and limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Instructions for obtaining service under this warranty:
If this product fails within the warranty period due to a defect in material
or workmanship, return it to your place of purchase for an exchange.
Registering Your Purchase
For best service and to receive periodic product updates, please visit
www.cloreregistration.com, click on the
Light-N-Carry logo, choose your model number, complete the information in the
web form and click “submit.” It’s that easy!
For answers to questions concerning use, out-of-warranty service,or
warranty/service information on this or other Clore Automotive products,
contact:
Clore Automotive Technical Service
8600 NE Underground Drive, Pillar 248
Kansas City, MO 64161
800.328.2921
913.310.105
www.cloreautomotive.com
Clore Automotive • Kansas City, MO 64161
www.cloreautomotive.com • 913.310.1050
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>