Buzzi DoP_P0066-Skin-01 Printed Acoustic Wallpaper Bringing Instruction Manual
- June 1, 2024
- Buzzi
Table of Contents
Buzzi DoP_P0066-Skin-01 Printed Acoustic Wallpaper Bringing
![Buzzi-DoP-P0066-Skin-01-Printed-Acoustic-Wallpaper-Bringing- PRODUCT]](https://manuals.plus/wp-content/uploads/2024/05/Buzzi- DoP-P0066-Skin-01-Printed-Acoustic-Wallpaper-Bringing-PRODUCT.png)
Specifications
- Product Name: BuzziSkin
- Material: 100% recycled PET bottles
- Acoustic Characteristics: Excellent
- Standards: EN15102, C-s2, do Formaldehyd pass, VCM pass, Heavy metals pass
Installation Tips
- When opening the boxes, take note of the batch number (Charge number).
- Treat the surface with a water-based primer before applying BuzziSkin for optimal adhesion results. Ensure the surface is smooth, dry, well-degreased, and dust-free.
- Keep notice of the arrow direction for proper alignment during installation.
- Use wallpaper paste for easy positioning (optional).
Important Notes
- No claims concerning deviation in color, size, and thickness can be accepted due to the nature of the product.
- Variations in color, thickness, and density may occur.
- Specify the batch number for re-orders, and try to order from the same batch to minimize color differences.
- Claims after installation will not be accepted.
FAQ
Q: Can I use BuzziSkin without treating the surface with a primer?
A: It is recommended to treat the surface with a water-based primer before
applying BuzziSkin for optimal adhesion results.
BuzziSkin
INSTALLATION MANUAL
Technical info
- DoP_P0066-Skin-01
- EN15102 0493
- Wall Covering www.buzzi.space
- C-s2,do
- Formaldehyd: pass VCM: pass
Heavy metals: pass
- BuzziSkin is made of 100% recycled PET bottles and has excellent acoustic characteristics.
- No claims concerning deviation in color, size, and thickness can be accepted. Because of the nature of the product this can variate. The risk is more likely in different batches.
- Even from the same batch we can not guarantee that there will be no color differences. However the risk will be lower.
- Please specify the batch number if a re-order needs to be done.
- If possible we deliver from the same batch.
USE
Skin can be used on all surfaces with the following exception.
- Skin can not be applied on vinyl or any other plasticized surface.
- Skin is not suitable as seating because it will become fluffy.
- We do not recommend installing BuzziSkin to the ceiling or floor.
INSTALLATION TIPS
When opening the boxes keep notice of the batch number.(Charge number)
After installation, no claims are accepted.
Installation should be done by professionals!
- Please keep the direction of the BuzziSkin in mind. This is printed on the back of the foil.
- Do not apply on bare, untreated surfaces. Treat the surface with a water-based primer before applying BuzziSkin for optimal adhesion results.
- The surface should be smooth, dry, well degreased and dust free.
- Pre-measure the whole surface and cut the BuzziSkin with a sharp knife.
- All corners must be made of separate lanes.
- For easy mounting it is possible to use wallpaper paste but this is not necessary.
- BuzziSkin is not intended to mask roughnesses.
Excluded
Included
Variation in color, thickness and density may occur.
-
Treat the surface with water-based primer before applying BuzziSkin Printed for optimal adhesion results. The surface should be smooth, dry, well degreased and dust free.
-
-
Keep notice of the arrow direction
BuzziSpace Group NV
Italiëlei 8, 2000 Antwerp Belgium (+32 (0)3 846 10 00