Clore Automotive LNC7250 Light-N-Carry Lenexa Versatile Performance Light User Manual

June 12, 2024
Clore Automotive

Clore Automotive LNC7250 Light-N-Carry Lenexa Versatile Performance Light

VERSATILE PERFORMANCE LIGHT
Operator’s Manual – Model No. LNC7250
WARNING: Failure to follow instructions may cause damage or explosion, always shield your eyes. Read the entire instruction manual before use.

WARNING: This product can expose you to chemicals including Vinyl- Chloride, Styrene, and Acrylonitrile, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.

Product Information

  • ON/OFF Power Button
  • COB LED Flood Light Mode
  • SMD Spot Light Mode
  • Dual Light Mode
  • Dimming Capability
  • Hands-Free Operation
  • M-Lock Mounting System
  • 3 Piece Accessory Kit
  • Micro-USB Charging Cord
  • Charging Status LED Indicator

Product Usage Instructions

Charging
NOTE: CHARGE THE ACTION LIGHT IMMEDIATELY AFTER PURCHASE, AFTER USE, AND AT LEAST EVERY 3 MONTHS WHEN NOT IN USE. Failure to do this will reduce the battery’s useful life.

  1. Connect the Micro-USB end of the charging cable to the Micro-USB port on the work light.
  2. Connect the USB end of the charging cable to a properly functioning USB port.
  3. The charging status LED will light red to indicate charging in progress.
  4. When the unit is fully charged, the status LED will light green.
  5. The charging process is fully automatic and the light can remain connected to the charger indefinitely without adverse consequences.

Operating Instructions
All of the accessories (head strap, belt clip, action mount) utilize our M-LOCK mounting system. To utilize these accessories, simply join the magnetic base of the action light to the accessory as shown on page 5.
Battery Access: Your action light is powered by a Clore PERFORMER 18650 lithium battery. The battery is swappable and replaceable. The battery compartment is accessed through the side cap with the arrow on its face. Note that there are two notches in the edge of the cap, one to indicate that the cap is in the closed position, one to indicate the cap is in the open position when each notch is aligned with the notch on the top of the light.

WARNING: This product can expose you to chemicals including Vinyl- Chloride, Styrene and Acrylonitrile, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov.

PLEASE SAVE THIS OWNER’S MANUAL AND READ IT BEFORE EACH USE.
This manual will explain how to use the action light safely and effectively. Please read and follow these instructions and precautions carefully. In the rare event that your work light contains a damaged or missing item, does not perform as specified, or requires warranty service, please call Technical Service at 913-310-1050. Save your purchase receipt, it is required for warranty service. This unit has a sealed lithium battery that should be kept at full charge. Recharge when first received, immediately after use, and every three months if not used. Failure to perform maintenance charges may cause the battery life to be reduced greatly. Read these instructions completely before using the LENEXA and save them for future reference. Always wear eye protection, appropriate protective clothing and other safety equipment when working on vehicles or other equipment. While the 18650 battery included with your action light is modular and swappable, it is critical that should you choose to replace or supplement the included battery, you use a like 18650 battery. Take care to ensure that any battery used is a button-top style and has a 3.7V nominal voltage. Use of a mismatched battery could result in fire, personal injury or property damage.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for Model No. LNC7250. Read, understand and all instructions, cautions and warnings listed in this manual. Failure to follow all instructions could result in personal injury, injury to others and property damage.

  • IMPORTANT! – Charge action light immediately after purchase, after use, and at least every 3 months when not in use.
  • DO NOT turn on the action light while it is being charged.
  • DO NOT handle or move the action light while it is being charged.
  • DO NOT look directly into the light or shine the light directly into the eyes of any person or animal.
  • DO NOT allow children to use the action light.
  • DO NOT operate the action light if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
  • DO NOT allow the unit’s battery to stay in a discharged state for long periods of time. This has a detrimental effect on battery life. Your action light comes equipped with a Micro-USB charging cord and an internal charging circuit meant to be connected to a USB outlet. Only connect your action light to a properly functioning USB outlet.
  • DO NOT charge with a damaged or frayed chord. A damaged cord can create a short condition. Lithium batteries are extremely sensitive to short circuits, which can result in an internal short in the battery, causing damage to the unit, further property damage, and possibly injury to persons around the unit.

PERSONAL SAFETY PRECAUTIONS

DO NOT disassemble the action lightly; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire.
DO NOT expose to temperatures above 140˚F (60˚C). Recycle or dispose of the used battery as required by local regulations.

FEATURES

  • ON/OFF Power Button – COB LED Flood Light Mode
  • SMD Spot Light Mode – Dual Light Mode
  • Dimming Capability – Hands-Free Operation
  • M-Lock Mounting System – 3 Piece Accessory Kit
  • Micro-USB Charging Cord – Charging Status LED Indicator

CHARGING
NOTE: CHARGE THE ACTION LIGHT IMMEDIATELY AFTER PURCHASE, AFTER USE, AND AT LEAST EVERY 3 MONTHS WHEN
NOT IN USE. Failure to do this will reduce the battery’s useful life. Connect the Micro-USB end of the charging cable to the Micro-USB port on the work light. Connect the USB end of the charging cable to a properly functioning USB port. The charging status LED will light red to indicate charging in progress. When the unit is fully charged, the status LED will light green. The charging process is fully automatic and the light can remain connected to the charger indefinitely without adverse consequences.

FEATURES BREAKDOWN

OPERATING INSTRUCTIONS

Do not turn on the action light while it is being charged.
Direct the lens away from your eyes before turning on the action light.

  • Press the POWER button to achieve the operational mode desired:
  • Press POWER once for Spot Light Mode.
  • Press POWER twice for Flood Light Mode.
  • Press POWER three times for Dual Mode.
  • Press POWER a fourth time to turn the unit off.
  • NOTE: When the light is in any working mode, press POWER to turn it off.
  • NOTE: When the light is in working mode and you turn the power off, it will resume in the same mode when turned back on. To clear the working mode, quickly turn the unit off and on a second time.

Dimming Feature
To adjust the intensity of the light output in any working mode, press and hold down the POWER button. After a 2-second hesitation, the unit will begin to dim to its lowest setting, blink, and then begin to brighten again. To set the unit at a specific level of intensity, release the power button when the desired intensity is reached.

Hands-Free Mode
To enter Hands-Free mode, while the light is on, press the Hands-Free button. The unit will turn off and the charging status LED will light red to indicate that the unit is in hands-free mode. Wave you hands across the face of the light (within 4 inches) to turn it on or off. Recharge the action light after use, and every 3 months when not is use.

LNC7250 Accessories
Your action light comes equipped with 3 accessories to enable you to deploy the light in a variety of ways to best meet your application needs. All of the accessories (head strap, belt clip, action mount) utilize our M-LOCK mounting system. To utilize these accessories, simply join the magnetic base of the action light to the accessory as shown on page 5.

Battery Access

Your action light is powered by a Clore PERFORMER 18650 lithium battery. The battery is swappable and replaceable. The battery compartment is accessed through the side cap with the arrow on its face. Note that there are two notches in the edge of the cap, one to indicate that the cap is in the closed position, one to indicate the cap is in the open position when each notch is aligned with the notch on the top of the light. To access the battery compartment, rotate the battery cap counterclockwise a quarter turn until the second notch is lined up with the notch in the top of the light. Pull the cap to remove the battery. To close the compartment, line that same notch up with the notch in the top of the light and then rotate the cap a quarter turn clockwise until the first notch is again aligned with the notch in the top of the light.
MAINTENANCE INSTRUCTIONS
After use and before performing maintenance, disconnect the action light from the charging cord. Use a dry cloth to wipe any dirt or oil from the charger, cord and light. Any servicing should be performed by qualified service personnel.

STORAGE INSTRUCTIONS
Store inside, in a cool, dry place. Take care to avoid/prevent damage to the charging cord and unit. Failure to do so could result in personal injury or property damage. Charge the action light’s internal battery immediately after purchase, after use and every 3 months when not in use. All batteries are affected by temperature. The ideal storage temperature is 70˚F. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a discharged state may result in shorter than expected battery life.

LIMITED WARRANTY

Clore Automotive warrants this product to be free from defects in material or workmanship for a period of one year from the date of the original end-user purchase. This warranty extends to each person who acquires lawful ownership within one year of the original retail purchase but is void if the product has been abused, altered, misused or improperly packaged and damaged when returned for repair. This warranty applies to the product only and does not apply to any accessory items included with the product, which are subject to wear from usage. Accessories include but are not limited to, wall chargers, charging cables, and hooks. The replacement or repair of these items shall be at the expense of the owner.

THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WARRANTY CONSTITUTE THE BUYER’S SOLE AND EXCLUSIVE REMEDY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 1 YEAR FROM THE DATE OF PURCHASE, ALL RISK OF LOSS FROM WHATEVER REASON SHALL BE PUT UPON THE PURCHASER. CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES: CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL NEVER EXCEED THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER
LIABILITY IS PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR IMPLIED), NEGLIGENCE, STRICT TORT OR ANY OTHER THEORY. Some states do not permit the limitation of warranties or the limitation of consequential or incidental damages, so the above disclaimer and limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Instructions for obtaining service under this warranty: If this product fails within the warranty period due to a defect in material or workmanship, return it to your place of purchase for an exchange.

Registering Your Purchase
For the best service and to receive periodic product updates, please visit www.cloreregistration.com, click on the Light-N-Carry logo, choose your model number, complete the information in the web form, and click “submit.” It’s that easy! For answers to questions concerning use, out-of-warranty service, or warranty/service information on this or other Clore Automotive products, contact: Clore Automotive Technical Service at 800.328.2921 913.310.1050 www.cloreautomotive.com Instructions for obtaining service under this warranty: If this product fails within the warranty period due to a defect in material or workmanship, return it to your place of purchase for an exchange. For answers to questions concerning use, out-of-warranty service, or
warranty/service information on this or other Clore Automotive products, contact: Clore Automotive Technical Service at 800.328.2921 913.310.1050 www.cloreautomotive.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Clore Automotive User Manuals

Related Manuals