Clore Automotive LNCMINI MANTIS COB LED Rechargeable Work Light Owner’s Manual
- June 12, 2024
- Clore Automotive
Table of Contents
Clore Automotive LNCMINI MANTIS COB LED Rechargeable Work Light
Product Information
The COB LED Rechargeable Work Light, Model No. LNCMINI is a portable lighting device designed for various work applications. It features a sealed lithium battery that provides long-lasting power. The work light has several key features, including:
- ON/OFF Power Button
- COB LED Work Light with 2 Settings
- SMD LED Focus Beam Light
- MicroUSB Charging Port
- State of Charge / Charging Status LED Indicator
- Magnet for easy attachment
- USB/Micro USB Charging Cord
- AC Wall Charger with USB Port
Product Usage Instructions
- Charging: Before initial use, and after each use, the work light should be fully charged. Connect the provided USB/Micro USB Charging Cord to the MicroUSB Charging Port on the work light, and connect the other end to a suitable power source, such as the AC Wall Charger with USB Port. The State of Charge / Charging Status LED Indicator will display the charging progress. Once fully charged, disconnect the charging cable.
- Operating Instructions: To turn on the work light, press the ON/OFF Power Button. The COB LED Work Light offers two settings for different lighting needs. The SMD LED Focus Beam Light provides a more concentrated beam. Select the desired lighting mode by pressing the appropriate button.
- Maintenance Instructions: After each use and before performing any maintenance, ensure that the work light is disconnected from the charger. Use a dry cloth to wipe off any dirt or oil from the charger, cord, and light. If any servicing is required, it should be performed by qualified service personnel.
- Storage Instructions: When not in use, store the work light in a cool, dry place. Avoid exposing it to extreme temperatures or direct sunlight.
- Replacement Parts: For any necessary replacement parts, please contact Technical Service at 913-310-1050.
Please refer to the complete user manual for further details and safety instructions.
WARNING : Failure to follow instructions may cause damage or explosion, always shield your eyes. Read the entire instruction manual before use.
WARNING: This product can expose you to chemicals including Vinyl- Chloride, Styrene, and Acrylonitrile, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov.
PLEASE SAVE THIS OWNER’S MANUAL AND READ IT BEFORE EACH USE.
This manual will explain how to use the work light safely and effectively. Please read and follow these instructions and pre-cautions carefully. In the rare event that your work light contains a damaged or missing item, does not perform as specified, or requires warranty service, please call Technical Service at 913-310-1050. Save your purchase receipt, it is required for warranty service. This unit has a sealed lithium battery that should be kept at full charge. Recharge when first received, immediately after each use, and every six months if not used. Failure to perform maintenance charges may cause the battery life to be reduced greatly.
WARNING
- Read these instructions completely before using the Light-N-Carry and save them for future reference. Before using the Light-N-Carry to jump-start a car, truck, boat, or to power any equipment, read these instructions and the instruction manual/safety information provided by the car, truck, boat, or equipment manufacturer. Following all manufacturers’ instructions and safety procedures will reduce the risk of accidents.
- Always wear eye protection, appropriate protective clothing, and other safety equipment when working on vehicles or other equipment.
- Use extreme care while working within the engine compartment, because moving parts may cause severe injury. Read and follow all safety instructions published in the vehicle’s Owner’s Manual.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for Model No.
LNCMINI. Read, understand, and follow all instructions, cautions, and warnings
listed in this manual. Failure to follow all instructions could result in
personal injury, injury to others, and property damage.
-
IMPORTANT! Charge the work light immediately after purchase, after each use, and at least every 3 months when not in use.
-
DO NOT turn on the work light while it is being charged.
-
DO NOT handle or move the work light while it is being charged.
-
DO NOT look directly into the light or shine the light directly into the eyes of any person or animal.
-
DO NOT allow children to use the work light.
-
DO NOT operate the work light if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
-
DO NOT allow the unit’s battery to stay discharged for long periods. This has a detrimental effect on battery life.
AC CHARGER FOR INDOOR USE ONLY. -
DO NOT expose the charger to water or use it in damp conditions.
-
WARNING! Do not use any other charger except the one provided to charge the work light. Use of a charger not supplied by the manufacturer may result in a risk of fire, injury to persons, and/or damage to property.
-
DO NOT use the work light with a charger that has a damaged cord or plug. Replace the cord or plug immediately. To reduce the risk of damage to the charger plug, pull by the plug, rather than the cord, when disconnecting the charger.
-
DO NOT use the provided charger to charge or power any other electrical item.
PERSONAL SAFETY PRECAUTIONS
- DO NOT disassemble the work light; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire.
- DO NOT expose to temperatures above 140˚F (60˚C). Recycle or dispose of the used battery as required by local regulations.
FEATURES
- ON/OFF Power Button
- COB LED Work Light with 2 Settings
- SMD LED Focus Beam light
- MicroUSB Charging Port
- State of Charge / Charging Status LED Indicator
- Magnet
- USB/Micro USB Charging Cord
- AC Wall Charger with USB Port
CHARGING
NOTE: CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE, AFTER EACH USE, AND AT LEAST EVERY 3 MONTHS WHEN NOT IN USE. Failure to do this will reduce the battery’s useful life.
- Connect the microUSB end of the charging cable to the microUSB port on the work light. Connect the USB end of the charging cable to the USB port of the AC charger. Plug the AC charger into a functioning AC outlet.
- The blue state of charge / charging status LEDs will blink in succession to indicate charging progress. To reach full charge, continue charging until all four LEDs are lit solid.
- Charging will take approximately 4 hours, depending on the unit’s state of charge at the start of the cycle.
- The charging process is fully automatic and the light can remain connected to the charger indefinitely without adverse consequences
OPERATING INSTRUCTIONS
Do not turn on the work light while it is being charged. Direct the lens away from your eyes before turning on the work light. Press the POWER button to achieve the operational mode desired:
- Press POWER for COB Work Light low brightness
- Press POWER a second time for COB Work Light high brightness
- Press POWER a third time for Focus Beam Light
- Press POWER a fourth time to turn the unit
The unit incorporates a rotating arm with an integrated mag-net in its base for ideal positioning, allowing it to be attached to any ferrous metal surface. Recharge the work light after use, and at least every 3 months when not in use
MAINTENANCE INSTRUCTIONS
- After use and before performing maintenance, disconnect the work light from the charger.
- Use a dry cloth to wipe any dirt or oil from the charger, cord, and light.
- Any servicing should be performed by qualified service personnel
STORAGE INSTRUCTIONS
- Store inside, in a cool, dry place.
- Take care to avoid/prevent damage to the charger, cord, and unit. Failure to do so could result in personal injury or property damage.
- Charge the work light’s internal battery immediately after purchase, after use, and every 3 months when not in use.
- All batteries are affected by temperature. The ideal storage temperature is 70˚F. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a discharged state may result in shorter than expected battery life.
REPLACEMENT PARTS
Charger replacement kit (includes a wall charger and USB/micro USB cable) – PART NO. LNC215
LIMITED WARRANTY
Clore Automotive warrants this product to be free from defects in material or workmanship for one year from the date of the original end-user purchase. This warranty extends to each person who acquires lawful ownership within one year of the original retail purchase, but is void if the product has been abused, altered, misused, or improperly packaged and damaged when returned for repair. This warranty applies to the product only and does not apply to any accessory items included with the product, which are subject to wear from usage. Accessories include but are not limited to, wall chargers, charging cables, and hooks. The replacement or repair of these items shall be at the expense of the owner.
THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WAR- RANTY CONSTITUTE THE BUYER’S SOLE AND EXCLUSIVE REMEDY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 1 YEAR FROM THE DATE OF PURCHASE, ALL RISK OF LOSS FROM WHATEVER REASON SHALL BE PUT UPON THE PURCHASER. CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES: CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL NEVER EXCEED THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER LIABILITY IS PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR IMPLIED), NEGLIGENCE, STRICT TORT OR ANY OTHER THEORY.
Some states do not permit the limitation of warranties or the limitation of consequential or incidental damages, so the above disclaimer and limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Instructions for obtaining service under this warranty:
If this product fails within the warranty period due to a defect in material or workmanship, return it to your place of purchase for an exchange.
Registering Your Purchase
For the best service and to receive periodic product updates, please visit www.cloreregistration.com, click on the Light-N-Carry logo, choose your model number, complete the information in the web form, and click “submit.” It’s that easy
For answers to questions concerning the use, out-of-warranty service, or warranty/service information on this or other Clore Automotive products, contact: Clore Automotive Technical Service 800.328.2921 913.310.1050
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>