Clore Automotive LNC1541 Light n Carry COB LED Rechargeable Work Light User Manual
- June 12, 2024
- Clore Automotive
Table of Contents
Clore Automotive LNC1541 Light n Carry COB LED Rechargeable Work Light
Product Information
The COB LED Rechargeable Work Light is a versatile lighting tool designed for various tasks. It is available in three models:
LNC1241, LNC1341, and LNC1541. This work light features the following:
- ON/OFF Power Button
- COB LED Work Light with 2 Settings
- SMD LED Focus Beam light
- MicroUSB Charging Port
- State of Charge / Charging Status LED Indicator
- Magnet for easy attachment
- Hook for hanging
- USB/Micro USB Charging Cord
- AC Wall Charger with USB Port
Product Usage Instructions
Please follow these instructions carefully to ensure safe and effective use of the COB LED Rechargeable Work Light:
Charging
- Before initial use, fully charge the work light by connecting the provided USB/Micro USB Charging Cord to the MicroUSB Charging Port on the work light and plugging the other end into a compatible power source.
- After each use, recharge the work light immediately to maintain its battery life. Connect the charging cord to the MicroUSB Charging Port and plug it into a power source.
- If the work light is not used for six months or more, perform a maintenance charge by connecting it to a power source using the charging cord.
Operating Instructions
To turn on the work light, press the ON/OFF Power Button. The COB LED Work
Light has two settings, which can be cycled through by pressing the Power
Button again. The SMD LED Focus Beam light can be activated by pressing and
holding the Power Button.
Maintenance Instructions
Before performing any maintenance, disconnect the work light from the charger.
Use a dry cloth to wipe any dirt or oil from the charger, cord, and light. If
any servicing is required, it should be performed by qualified service
personnel.
Storage Instructions
When not in use, store the work light in a cool and dry place.
Avoid exposing it to extreme temperatures or moisture.
Replacement Parts
If any parts of the work light become damaged or missing,contact Technical
Service at 913-310-1050 for assistance
in obtaining suitable replacement parts.
Limited Warranty
The COB LED Rechargeable Work Light is covered by a limited warranty.
Please refer to the warranty information provided in the instruction manual
for details on coverage and warranty service.
COB LED Rechargeable Work Light
Operator’s Manual
Model Nos. LNC1241, LNC1341, LNC1541
WARNING
Failure to follow instructions may cause damage or explosion, always shield
eyes. Read entire instruction manual before use.
This product can expose you to chemicals including Vinyl-Chloride, Styrene and
Acrylonitrile, which are known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands after handling.
For more information go to
www.P65Warnings.ca.gov.
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the work light safely and effectively.
Please read and follow these instructions and precautions carefully. In the
rare event that your work light contains a damaged or missing item, does not
perform as specified,or requires warranty service, please call Technical
Service at 913-310-1050. Save your
purchase receipt, it is required for warranty service.
This unit has a sealed lithium battery that should be kept at full charge. Recharge when first received, immediately after each use, and every six months if not used. Failure to perform maintenance charges may cause the battery life to be reduced greatly.
Read these instructions completely before using the Light-N-Carry and save
them for future reference. Before using the Light-N-Carry to jump start a car,
truck, boat or to power any equipment, read these instructions and the
instruction manual/safety information provided by the car, truck, boat or
equipment manufacturer.
Following all manufacturers’ instructions and safety procedures will reduce
the risk of accident.
Always wear eye protection, appropriate protective clothing and other safety
equipment when working on vehicles or other equipment.
Use extreme care while working within the engine compartment, because moving
parts may cause severe injury. Read and follow all safety instructions
published in the vehicle’s Owner’s Manual.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating
instructions for Model Nos.
LNC1241, LNC1341 and LNC1541. Read, understand and follow all instructions,
cautions and warnings listed in this manual. Failure to follow all
instructions could result in per- sonal injury, injury to otners and property
damage.
IMPORTANT! — Charge work light immediately after purchase, after each use, and at least every 3 months when not in use.
- DO NOT turn on the work light while it is being charged.
- DO NOT handle or move the work light while it is being charged.
- DO NOT look directly into the light or shine the light directly into the eyes of any person or animal.
- DO NOT allow children to use the work light.
- DO NOT operate the work light if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- DO NOT allow the unit’s battery to stay in a discharged state for long periods of time. This has a detrimental effect on battery life.
- AC CHARGER FOR INDOOR USE ONLY. DO NOT expose the charger to water or use in damp conditions.
WARNING! Do not use any other charger except the one provided to charge
the work light. Use of a charger not supplied by the manufacturer may result
in a risk of fire, injury to persons and/or damage to property.
DO NOT use the work light with a charger which has a dam- aged cord or plug.
Replace the cord or plug immediately.
To reduce the risk of damage to the charger plug, pull by the plug, rather
than the cord, when disconnecting the charger.
DO NOT use the provided charger to charge or power any other electrical item.
PERSONAL SAFETY PRECAUTIONS
DO NOT disassemble the work light; take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of
fire.
DO NOT expose to temperatures above 1400F (600).
Recycle or dispose of the used battery as required by local regulations.
FEATURES
- ON/OFF Power Button
- COB LED Work Light with 2 Settings
- SMD LED Focus Beam light
- MicroUSB Charging Port
- State of Charge / Charging Status LED Indicator
- Magnet
- Hook
- USB/Micro USB Charging Cord
- AC Wall Charger with USB Port
CHARGING
NOTE: CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE, AFTER EACH USE,
AND AT LEAST EVER Y 3 MONTHS WHEN NOT IN USE. Failure to do this will reduce
the battery’ s useful life.
Connect the microUSB end of the charging cable to the microUSB port on the
work light. Connect the USB end of the charging cable to the USB port of the
AC charger. Plug the AC charger into a functioning AC outlet.
The blue state of charge / charging status LEDs will blink in succession to
indicate charging progress. To reach full charge, continue charging until all
four LEDs are lit solid.
Charging will take approximately 4 hours, depending on the unit’s state of
charge at the start of the cycle.
The charging process is fully automatic and the light can remain connected to
the charger indefinitely without adverse consequences.
MAINTENANCE INSTRUCTIONS
After use and before performing maintenance, disconnect the work light from
the charger.
Use a dry cloth to wipe any dirt or oil from the charger, cord and light.
Any servicing should be performed by qualified service personnel.
STORAGE INSTRUCTIONS
Store inside, in a cool, dry place.
Take care to avoid/prevent damage to the charger, cord and unit. Failure to do
so could result in personal injury or property damage.
Charge the work light’s internal battery immediately after purchase, after use
and every 3 months when not in use.
All batteries are affected by temperature. The ideal storage temperature is
70˚F. The internal battery will gradually self-discharge (lose power) over
time, especially in warm environments. Leaving the battery in a discharged
state may result in shorter than expected battery life.
REPLACEMENT PARTS
Charger replacement kit (includes wall charger and USB/microUSB cable) – PART
NO. LNC215
LIMITED WARRANTY
Clore Automotive warrants this product to be free from defects in material or
workmanship for a period of one year from the date of original end user
purchase.
This warranty extends to each person who acquires lawful ownership within one
year of the original retail purchase, but is void if the product has been
abused, altered, misused or improperly packaged and damaged when returned for
repair.
This warranty applies to the product only and does not apply to any accessory
items included with the product, which are subject to wear from usage.
Accessories include, but are not limited to, wall chargers, charging cables
and hooks. The replacement or repair of these items shall be at the expense of
the owner.
THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WARRANTY CONSTITUTE THE BUYER’S SOLE
AND EXCLUSIVE REMEDY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 1
YEAR FROM DATE OF PURCHASE, ALL RISK OF LOSS FROM WHATEVER REASON SHALL BE PUT
UPON THE PURCHASER.
CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES
UNDER ANY CIRCUMSTANCES:
CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL
NEVER EXCEED THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER
LIABILITY IS PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR
IMPLIED),NEGLIGENCE, STRICT TORT OR ANY OTHER THEORY.
Some states do not permit the limitation of warranties or limitation of
consequential or incidental damages, so the above disclaimer and limitation
may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Instructions for obtaining service under this warranty:
If this product fails within the warranty period due to a defect in material
or workmanship, return it to your place of purchase for an exchange.
Registering Your Purchase
For best service and to receive periodic product updates, please visit
www.cloreregistration.com, click on the
Light-N-Carry logo, choose your model number, complete the information in the
web form and click “submit.”
It’s that easy!
For answers to questions concerning use, out-of-warranty service, or
warranty/service information on this or other Clore Automotive products,
contact:
Clore Automotive Technical Service
800.328.2921
913.310.1050
www.cloreautomotive.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>