FFpower B2000 Smart Expansion Battery User Manual

May 15, 2024
FFPOWER

FFpower B2000 Smart Expansion Battery

FFpower-B2000-Smart-Expansion-Battery-PRODUCT

Product Information

Specifications:

  • Model: B2000
  • Model: BP2000
  • Connection: Parallel
  • Compatible with: AC adapter/solar/car charger

Product Usage Instructions

Connecting B2000 and BP2000

  1. Ensure both B2000 and BP2000 are fully charged before connecting.
  2. Use the provided parallel connection wires to connect the B2000 and BP2000.
  3. If the LCD screen displays “Y”, it indicates that the connection is correct.

Recharging and Discharging

When the LCD screen shows “Y” after connecting the B2000 with BP2000:

  • The BP2000 + B2000 are correctly connected for recharging and discharging mutually.

Maintenance and Care

Ensure to disconnect the devices after charging or discharging is complete to avoid overloading.

Frequently Asked Questions

  • What does it mean when the LCD screen shows “Y”?
    • When the LCD screen displays “Y”, it indicates that the BP2000 + B2000 connection is correct for recharging and discharging.
  • How can I ensure the correct connection between B2000 and BP2000?
    • Make sure both devices are fully charged before connecting them using the parallel connection wires. Verify the connection by checking the LCD screen for the “Y” display.

Specifications

FFpower-B2000-Smart-Expansion-Battery-FIG 14

WHAT’S IN THE BOX

FFpower-B2000-Smart-Expansion-Battery-FIG
\(1\)

OVERVIEW

FFpower-B2000-Smart-Expansion-Battery-FIG
\(2\)

1. LCD Display 6. DC Switch
2. 12V=10A Cigarette Lighter Socket

7. Main Power Switch

3. 48V=15A XT90 Output

| 8.XT60Input12V~48V

10A Max(200W Max)

4. 5V=2.4A USB-A Output| 9. Battery Expansion Port 1
5. PD1DOW USB-C Output| 10. Battery Expansion Port 2

Main Power Switch

Press the power button for 3S to switch it on, press it again for 3S to turn it off.
Note: Short press the switch will turn on/off the LCD display. If there is no operation for 30 minutes, the LCD display will be turned off and the power will be switched off automatically.

DC Switch

  1. Press and hold the main power switch for 3 seconds to turn on the power station. Short press the DC button to switch the DC/USB output ports on. Short-press it again to switch the DC/USB output ports off.
  2. Check the remaining battery power. If the remaining battery level is less than 10%, please recharge the battery.
  3. Connect the device to the DC cigarette lighter socket, 48V XT90 Output.

Note:

  • When the DC output port is not in use, please turn off the DC output switch to save power.

XT60 Input Port Recharging

From AC Wall Outlet

  • Connect the plug of adapter to the wall outlet, the other side to the X160 input port, it will automatically charging even if the power is off.
  • When charging, the LCD screen indicates the percentage of remaining power, the battery indicator blinks. It also indicates X60 input, input power and estimate fully charged time.

FFpower-B2000-Smart-Expansion-Battery-FIG \(3\)

From the Solar Panel

  • Put the Solar Panel(not included) outside under the sunshine.
  • Connect the solar panels(in series or parallel) with an open circuit voltage range of 12V-48V.
  • The max input current of solar charging is 10A and the max input power is 200W. Even if the power is over than 200W, it will input 200W at most, but if the input power is not between 12V-48V, it can not be charged.

Attention:

  • Connect the plug of MC4 to the solar panel.
  • Connect the X160 to the input port, it will automatically charge even if the power is off.
  • When charging, the LCD screen indicates the percentage of remaining power, and the battery indicator blinks. It also indicates XT60 input, input power and estimate fully charged time.FFpower-B2000-Smart-Expansion-Battery-FIG \(4\)

Car Charging

  • With the included XT60-Car Charging Cable, connect the B2000 to the cigarette lighter port of the car via the car charging cable.
    • When charging, the LCD screen indicates the percentage of remaining power, the battery indicator blinks. It also indicates XT60 input, input power and estimate fully charged time.FFpower-B2000-Smart-Expansion-Battery-FIG
\(5\)

LCD DISPLAY

FFpower-B2000-Smart-Expansion-Battery-FIG
\(6\)

  1. When the LCD screen shows , it means the BP2000 + B2000 connects correctly.
  2. When the B2000 is connected with BP2000 and the LCD screen shows xi, it means the BP2000 + B2000 connects correctly and can recharge and discharge mutually.

Note:

When connecting the BP2000 with the B2000, if the remaining power is less than 5%, it cannot be paralleled (because the battery voltage gap is large). However, when you connect the input power source, you can activate it successfully and recharge the BP2000 and B2000. Normally, after the BP2000 and B2000 are connected, the high-battery device will automatically charge the low battery. However, if one of the devices is below 5%, the system will determine that the voltage gap is too large and cannot be connected successfully. At this time, when you connect the input power source, you can activate it successfully and recharge the BP2000 and B2000.

Expand with the BP2000 Power Station

  • ВР2000 can connect up to 7 expansion batteries at the same time, which can expand the capacity up to 16384Wh.
  • After connecting the BP2000 and B2000, long press the main power button on BP2000 or B2000, it can power ON both the BP2000 and
  • Short press the main power button, the LCD screen will be off, and the indicator will blink.

Connection Notes:

  1. Before connecting the B2000 expansion battery, please make sure that the power of both BP2000 and B2000 are turned off.
  2. After connecting the B2000 expansion battery, please make sure that both the BP2000 and B2000 screens display the parallel power icon before using it.
  3. Before connecting/disconnecting the B2000 expansion battery, please turn off the B2000 first.
  4. Do not touch the metal terminal of the wire with your hands. Wipe it with a dry cloth.
  5. Please ensure that the parallel wires are tightly connected to the parallel ports of the BP2000 power station and the B2000 expansion battery. Improper connections may cause heat at the connection terminals, affecting the use of the device and possibly causing a fire.
  6. If you need to charge the BP2000+B2000, please connect the ВР2000 to the wall outlet/ solar panel to charge. If the B2000 expansion battery is separately connected to the AC adapter/solar/car charger, please disconnect the B2000 before connecting to the BP2000

BP2000+B2000

Expansion battery pack In this case, the input and output of the B2000 expansion battery will be stopped, only for capacity expansion.

  1. Input: The B2000 expansion battery will not be charged even if it is connected to the AC adapter or solar/car charging board.
  2. Output: 12V/48V/USB output port on the B2000 expansion battery is also unavailable.

ВР2000 Expansion battery pack

In this case, the input and output of the B2000 expan- sion battery A is normal to use. B2000 expansion battery B and C input and output will be stopped, only for capacity expansion.

TROUBLESHOOTING

FFpower-B2000-Smart-Expansion-Battery-FIG
\(12\) FFpower-B2000-Smart-Expansion-Battery-FIG
\(13\)

FAQ

  • Why is there a noise when using it?
    The noise comes from the fan or the relay when you start or use it.

  • Is it normal for the charging cable to heat up during use?
    Yes, it is. The charge cable complies with national safety standards and has passed the certification.

  • How can we know the remaining discharge time?
    Please check the data on the LCD screen, it will show the remaining discharge time when you turn it on.

  • How can we confirm the product is charging?
    When the product is undercharging, the product screen will show the input wattage and the power percentage indicator will blink.

  • How should we clean the product?
    Please use a dry, soft, clean cloth or tissue to wipe the product.

  • How to store?
    Please turn off the product and place it in a dry environment. Do not place this product near water. For long-term storage, we recommend using the product every three months(Run out the remaining power first and recharge it to the percentage you want, such as 50%).

MAINTENANCE

  1. It is recommended to use or store this product in an environment of 68 °F (20°C) to 36 °F (30°C), keep it away from water, heat, and other metal objects.
  2. For safety reasons, please do not store this product in an environment higher than 113 °F (45°C) or lower than 14 °F (- 10°C) for a long time.
  3. If it is not used for a long time, please charge it to 60% before storing it. If the battery is left unused for a long time when the battery is seriously insufficient, it will cause irreversible damage to the battery and shorten the cycle life of the product.

WARRANTY

The product is with a 1-year warranty from the date of purchase (damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service centre, or act of God are not included). During the warranty period and upon verification of defects, this product will be replaced when returned with proof of purchase.

CUSTOMER SUPPORT

If you need help regarding product issues, after-sales service, or other relevant problems, please contact us via email: at ffpowers@outlook.com and provide the following information:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals