anslut 019393 Solar Panel Instruction Manual
- June 12, 2024
- anslut
Table of Contents
anslut 019393 Solar Panel Instruction Manual
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions)
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2022-01-17
© Jula AB
SAFETY INSTRUCTIONS
Read these instructions carefully before installation and use, and save them for future reference.
- The solar panel generates voltage when exposed to light. Follow all the relevant electrical safety regulations.
- The product must only be installed and maintained by qualified personnel.
- Pay attention to high DC voltages when connecting solar panels.
- Avoid scratching or otherwise damaging the back of the panel.
SYMBOLS
TECHNICAL DATA
DESCRIPTION
The product is made of hardened glass.
The aluminium frame is reinforced with corner protection. The product can be
used for both temporary and permanent installation.
FEATURES
- Monocrystalline solar panel with cost-effective and easy to use digital charging regulator with pulse width modulation.
- 3-stage intelligent PWM charging – boost charging, peak/equalisation charging and trickle charging.
- 3 battery alternative – sealed, gel and wet-cell battery.
- Battery temperature compensation.
- Convenient and intuitive user interface.
- USB port for charging electronic equipment.
- Button setting of battery type and load output.
- Comprehensive electronic safety functions.
WARNING!
- The solar panel generates voltage when exposed to light. Follow all the relevant electrical safety regulations.
- The product must only be installed and maintained by qualified personnel.
- Pay attention to high DC voltages when connecting solar panels.
- Avoid scratching or otherwise damaging the back of the panel.
INSTALLATION
SELECT A SUITABLE PLACE TO INSTALL
-
Choose a position for installation with as much direct solar radiation and as many unshadow hours of sunlight per day as
possible. -
The efficiency of the solar panel decreases over time – this is completely normal and not a malfunction.
-
External factors such as the intensity of the solar radiation, shadowing at the installation point, fouling, snow and the
ambient temperature, can also affect the performance of the solar panel.
INSTALL SOLAR PANEL
Installation can be carried out in several different ways. Do not install the solar panel where sunlight is blocked. The solar panel has pre-drilled holes for hanging from hooks or a line.
CONNECT TO ELECTRICAL SYSTEM
The figures on the previous page show two examples of how the product can be connected.
Connected in parallel
One example of how the product can be connected electrically.
FIG. 1
Another example of how the product can be connected electrically. Up to four
35 W solar panels can be connected to the same circuit. The figure shows a
parallel connection with a total output of up to 140 W.
FIG. 2
NOTE:
- Never connect more than four solar panels in parallel.
Documents / Resources
|
anslut 019393 Solar
Panel
[pdf] Instruction Manual
019393, 019393 Solar Panel, Solar Panel, Panel
---|---