BEGA 66965 Light Brick Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 66965 Light Brick
DIMENSIONS
Application
Lichtbausteinb Rectangle
Wall luminaire for corner mounting.
The luminaire is ideal for places where a soft and uniform lighting
distribution is required. For interior and exterior applications.
Product description
Luminaire made of aluminium alloy and stainless steel BEGA Unidure® coating technology Opal glass satin matt 2 mounting holes ø 6mm Distance apart 200mm 1 cable entry for mains supply cable up to ø 10,5mm Connection terminal 2.5@ Earth conductor connection Lamp holder E 27 Safety class I Protection class IP 44 Protected against granular foreign bodies ≥ 1 mm and splash water Impact strength IK03 Protection against mechanical impacts < 0.35 joule
– Safety mark
– Conformity mark Weight: 2.0 kg
Lamps
Luminaire with screw base E 27
Lamp output max. 2 × 60 W
This product contains light sources of energy
efficiency classes E, F
Supplied lamp
2 × BEGA LED lamp 13584
LED Retrofit 7 W · 1610 lm · 3000 K
Luminaire efficiency: 64%
Additional BEGA LED lamps are available for this luminaire:
13 586 LED 7 W · 805 lm · 3000 K
dimmable
13 588 LED 8 W · 1055 lm · 3000 K
13 590 LED 12 W · 1400 lm · 3000 K
13 592 LED 12 W · 1400 lm · 3000 K
dimmable
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Installation
Lead the mains supply cable through the cable entry into the luminaire
housing.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Make earth conductor connection. Push silicone sleeves over the lines and make
electrical connection. Insert lamp.
Snap the opal glass into the lower spring clips, centralise and push into the
upper spring clips.
Relamping · Maintenance
Disconnect the electrical installation.
Pull glass out of the spring clips and remove from the luminaire back housing.
Clean the glass and luminaire housing using only suitable cleansers.
When cleaning please do not use high pressure cleaners.
Change the lamp.
Snap the glass into the lower spring clips, centralise and push into the upper
spring clips.
Spares
Spare glass 11 002 158 .0
LED lamp 3000K 13 584
Lampholder 63 000 052
Customer Support
2/2 BEGA Gantenbrink-Leuchten KG
·Postfach 3160
58689 Menden
info@bega.com
www.bega.com