motionics WiMER1+ Wireless Measurement Read User Guide
- June 12, 2024
- motionics
Table of Contents
motionics WiMER1+ Wireless Measurement Read
Important Notes
- Turn off the device after use. It will NOT turn o! automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
-
10-Pin Connector – connects to Mitutoyo Digimatic data cable
-
Tri-Color LED
Device is on
Device is charging
Device is fully charged -
USB Port – connects to USB cable to charge
-
On/Off Button push on and push off.
-
Trigger Connector – 2.5 mm audio port, connects to trigger switch
-
Antenna – increases WiMER1+ Range
Product Page
Included in the box
- WiMER1+ Base 1X
- External Antenna 1X
- Trigger Switch 1X
- USB Charging Cable 1X
- USB Power Adapter 1X
- User Guide 1X
Compatible Software
- iOS: MultiGage Reader (download for FREE from the App Store)
- Android: MultiGage Reader (download for FREE from the Play Store)
- Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App iPhone/iPad
MultiGage Reader APP Android
Quick Start
- Install external antenna on WiMER1+.
- Turn on WiMER1+ and connect to Mitutoyo instruments.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run one of the aforementioned apps/software.
- In the main page, tap Scan/+ button to bring up a new pairing page.
- Wait for the software to finish scanning nearby devices, select WIMERXXX to connect.
Customer Support
Motionics, LLC © 2023 Motionics, LLC
www.motionics.com
[email protected]
Made in the U.S.A.
Documents / Resources
|
motionics WiMER1+ Wireless Measurement
Read
[pdf] User Guide
WiMER1, WiMER1 Wireless Measurement Read, Wireless Measurement Read,
Measurement Read, Read
---|---
References
Read User Manual Online (PDF format)
Loading......