motionics 021617 Wireless Crankshaft Deflection Gage Kit User Guide
- June 9, 2024
- motionics
Table of Contents
Wireless Crankshaft Deflection
Gage Kit User Guide
Important Notes
- Turn on both Bluetooth transmitter & digital indicator before pairing.
- Turn off both Bluetooth transmitter & digital indicator after each use. They will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and avoids the warranty.
- Wireless Crankshaft Gage operates on two separate batteries:
- Rechargeable built-in Li-Po battery for the Bluetooth transmitter
- Coin SR44 or LR44 battery for the digital dial
- Use the punch included in this kit or other 60° punches to create blunt points on crankshaft webs.
- Adjust the adjustable probe to keep the gage travel around middle of its measurement range.
Included In The Package
- Wireless Crankshaft Gage
- Adjustable Probe
- Extension Rod Set (1/2” to 6” one each)
- 60° Punch
- Protective Carrying Case
USB Charging Cable
USB Power Adapter
Crankshaft Deflection Test App for iPad
Quick Start
-
Connect wireless gage and adjustable probe. Add extension rods based on cranksha: web gap.
-
Turn on both digital indicator and Bluetooth transmi6er of the gage. Pair the gage in the iPad App.
-
Create 60° blunt points on cranksha7 webs using the punch in the kit. Install wireless gage between two blunt points.
-
Rotate cranksha/ pin to top ver3cal posi3on. Adjust the orienta3on of wireless gage un3l C button turns green in the iPad App.
-
Rotate cranksha/ pin to near bo3om position. Once A button turns green, tap on it and start data collection.
-
Rotate cranksha/ in an1clockwise direc1on, tap buttons B to E one by one when they turn green to finish test for one web.
Motionics, LLC 8500 Shoal Creek Blvd Building 4 Suite 209 Austin, TX 78757
www.motionics.com
[email protected]
© 2017 Motionics, LLC. All rights reserved.
Made in the U.S.A