motionics WiMER10 Wireless Measurement Read User Guide
- June 8, 2024
- motionics
Table of Contents
Wireless Measurement Read
WiMER10 User Guide
WiMER10 Wireless Measurement Read
Important Notes
- Turn off the device after use. It will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
-
Sensor Connector - Connect to analog sensor
-
Tri Color LED
– Device is on
– Device is in charge
– Device is fully charged -
Charging Port - Connect to cable to charge WiMER10
-
On/Off Button - Press to turn WiMER10 On/Off
-
External Antenna
Included in the Package
- WiMER10 Base
- USB Charging Cable
- USB Power Adapter
- User Guide
Compatible Software
- iOS: Multi Gage Reader
- Android: Multi Gage Reader
- Windows: Multi Gage Reader (BLE Dongle Required)
- iOS app can be directly downloaded from the app store for FREE
- Android app can be directly downloaded from the Google Play Store for FREE
- Windows software is available on Motionics website
Quick Start
- Connect analog sensor to WiMER10.
- Turn on your WiMER10.
- Plug in USB Bluetooth dongle, If you are using windows PC.
- Run the software, tap Scan/+button to enter pairing page.
- Wait for the software to finish scanning nearby devices, select WiMERXXXX to connect.
- Connection may take a few seconds, once paired, pressure readings appears in the software.
Motionics, LLC
www.motionics.com
info@motionics.com
8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757
© 2022 Motionics, LLC.
All rights reserved. Made in the U.S.A
Documents / Resources
|
motionics WiMER10 Wireless Measurement
Read
[pdf] User Guide
WiMER10 Wireless Measurement Read, WiMER10, Wireless Measurement Read,
Measurement Read
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>