motionics VibeSense Wireless Tri-axial Vibration Sensor User Guide
- June 8, 2024
- motionics
Table of Contents
motionics VibeSense Wireless Tri-axial Vibration Sensor
Important Notes
- Turn off the device after use. It will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
- This device is pre-calibrated. You will need a 1g 159Hz vibration shaker if you want to calibrate it again.
Description
- Mounting Hole – connect to magnetic base or fixture with ¼-28 set screw
- Magnetic Switch Sensing Region – move the magnetic switch key close to turning the device on/off
- Status LED
- Device is on (flashing)/device is connected (solid)
- Device is in charge
- Device is fully charged
- Wireless Charging Coil – flip the device and place it on the wireless charging pad to recharge battery
Included in the box
- VibeSense Wireless Tri-axial Vibration Sensor
- Magnetic On/Off Switch Key
- ¼-28 Accelerometer Mounting Set Screw
- Qi Wireless Charging Pad
- USB Charging Cable
- USB Power Adapter
- Reflective Tape
- User Guide
Compatible Software
- iOS: VibeSenseRB, VibraTestPro
- iOS app can be directly downloaded from the App Store
Quick Start
- Attach VibeSense wireless accelerometer to the testing machine/fixture directly with a ¼-28 set screw or via a magnetic base.
- Move the magnetic switch key close to the sensing region on the VibeSense accelerometer to turn on the device.
- Launch the VibeSense RB app.
- On the main page, tap the Sensor button on the bottom right corner to bring up the sensor pairing/status page.
- Move iPad close to the accelerometer, it will be detected and connected.
- Select a balancing method and start balancing with a step-by-step guide in the app.
- To disconnect the device, go to the sensor pairing/status page again and tap the Disconnect button.
- To turn off the device, move the magnetic switch key close to the sensing region on the VibeSense accelerometer.
- To recharge the device, flip and place it on the wireless charging pad.
**Contact Information
**
Motionics, LLC www.motionics.com.
info@motionics.com.
8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757 © 2022
Motionics, LLC. All rights reserved.
Made in the U.S.A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>