BEGA 31 058 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 31 058 Wall Luminaire
Product Information
Instructions for use
Product Description
DIMENSION
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 31 058 Wall Luminaire

Product Information

Product Name	Wandleuchte Wall luminaire Applique
Model Number	31 058
IP Rating	IP44
Application	Wall luminaire with shielded light source for many lighting tasks

on or in buildings.

Instructions for use

Application
Wall luminaire with shielded light source for many lighting tasks on or in buildings.

Lamp

Module connected wattage: 3 W
Luminaire connected wattage: 4.1 W
Rated temperature: ta = 25 °C
Ambient temperature: ta max = 45 °C

31 058 K3

Module designation: LED-0422/830
Colour temperature: 3000 K
Colour rendering index: CRI > 80
Module luminous flux: 525 lm
Luminaire luminous flux : 306 lm
Luminaire luminous efficiency: 74,6 lm / W

Product Description

Luminaire made of copper and stainless steel Opal glass with screw neck
Silicone gasket
Wall mounting with a mounting plate made of stainless steel, Steel grade number 1.4301 Mounting plate with 2 fixing
holes ø 4.5 mm · 52 mm spacing
1 cable entry for mains supply cable up to ø 10,5 mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Safety mark
– Conformity mark
Weight: 1.3 kg
This product contains light sources of energy efficiency class(es) C

DIMENSION

BEGA-31-058-Wall-Luminaire-fig-1

Light technique

Part of the light shines upwards through a slit in the reflector shield.
The shape of the luminaire thus remains visible, even in the dark.

Safety:

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection:

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc., we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Installation

Please use the protective gloves provided for the installation to prevent fingerprints on the luminaire.
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Remove glass with reflector from the luminaire housing.
Undo screw at wall box and remove the mounting plate.
Lead the mains supply cable through the cable entry of the mounting plate.
Note position of application of the mounting plate “arrow down”.
Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
Make earth conductor connection between luminaire housing and mounting plate.
Note position of application of the luminaire “arrow down”.
Place wall bracket onto mounting plate, adjust and fix with screw.
Screw glass with top reflector and gasket into the luminaire housing.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Copper:

The luminaire parts made of solid copper are delivered with the metal’s natural surface color. Time and weather factors create the natural patina characteristic for copper.