OPTONICA 2035 Aluminium Spotlight Fixture Instruction Manual
- June 12, 2024
- OPTONICA
Table of Contents
OPTONICA 2035 Aluminium Spotlight Fixture
Product Information
- Importer: Prima Group 2004 LTD
- Address: Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor
- Phone: +359 2 988 45 72
- Impoteur: Prima Group 2004 LTD
- Adresse: Bulgarien, 1784 Sofia, Mladost 1, bl. 144, Erdgeschoss
- Telefon: +359 2 988 45 72
Product Usage Instructions
To use the product, please follow the instructions below:
- Make sure the product is placed on a stable surface.
- Connect the necessary cables and power source according to the provided diagram.
- Turn on the product using the power button located on the front panel.
- Refer to the user manual for specific settings and configurations.
- To operate the product, use the control buttons or remote control provided.
- If you encounter any issues or have questions, refer to the troubleshooting section of the user manual or contact our customer support at the provided phone number.
- When not in use, turn off the product and disconnect it from the power source.
- Regularly clean the product using a soft cloth to maintain its appearance.
Installation
- Switch off the power
- Ensure that the void depth is minimum 90 mm and the thickness of the ceiling is maximum 20 mm (Pic 1)
- Drill the appropriate hole on the ceiling as per the cut-out size (Pic 2)
- Put the LED bulb into the fixture (Pic 3)
- Connect the power 100-240VAC (Pic 4)
- Holding the spring clip upwards and put the fixture into the hole and ensure the fixture are installed properly. (Pic 5)
- Adjust the angle swich on the power if above steps are done properly without any mistakes.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144,
Ground Floor;
Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>