BEGA 50659K27 LED Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 50659K27 LED Ceiling and Wall Luminaire
Product Information
Module Designation| Color Temperature| Colour Rendering Index| Module Luminous
Flux| Luminaire Luminous Flux| Luminaire Luminous Efficiency
---|---|---|---|---|---
4x LED-0280/927| 2700 K| CRI > 90| 2600 lm| 1868 lm| 97.8 lm / W
4x LED-0280/930| 3000 K| CRI > 90| 2640 lm| 1896 lm| 99.3 lm / W
4x LED-0280/940| 4000 K| CRI > 90| 2800 lm| 2011 lm| 105.3 lm / W
Product Usage Instructions
To ensure proper installation and operation of the luminaire, please follow
the below instructions:
- The installation and commissioning of the luminaire should only be carried out by a qualified electrician in accordance with national safety regulations.
- Ensure that the luminaire is properly connected to the power supply.
- Do not make any modifications to the luminaire without consulting the manufacturer. The person responsible for modifications will be considered the manufacturer and any damage caused as a result will not be covered under warranty. For overvoltage protection, it is recommended to use separate overvoltage protection components in addition to the built-in protection.
- Optional metal trim rings are available for this luminaire. The trim rings are accessories and must be ordered separately.
For more information and to purchase optional accessories, please visit our website at www.bega.com.
Ceiling and wall luminaire for indoor use
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass,
satin matt, and aluminum alloy housing, for all lighting tasks. They are ideal
for places where a soft and uniform lighting distribution is required.
Luminaire with a high protection class.
Product Description
Luminaire made of aluminum alloy
Finish Colour white
- Hand-blown opal glass, satin matt, with sliding-bolt closure
- 2 mounting holes ø 6 mm
- Distance apart 208 mm
- 2 cable entries for through-wiring for mains cable up to ø 10,5 mm max. 5 x 1.5@ Connection terminal 2.5@
- Earth conductor connection
- 2-pole connecting terminal for digital control
LED power supply unit
- 220-240 V x 0/50-60 Hz
- DC 176-275 V
- DALI-controllable
- Basic insulation is provided between the mains and control cables
BEGA Thermal Control
Temporary thermal regulation to protect temperature-sensitive components
without switching off the luminaire
Safety class
- Protection class IP 44
- Protected against granular foreign bodies
- ≥ 1 mm and splash water
- Impact strength IK03
Protection against mechanical
- impacts < 0.35 joule
- r – Safety mark
- c – Conformity mark
- Weight: 2.1 kg
- This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Lamp
- Module connected wattage 16.8 W
- Luminaire connected wattage 19.1 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 45 °C
50 659 K27
- Module designation 4x LED-0280/927
- Color temperature 2700 K
- Color rendering index CRI > 90
- Module luminous flux 2600 lm
- Luminaire luminous flux * 1868 lm
- Luminaire luminous efficiency * 97,8 lm / W
50 659 K3
- Module designation 4x LED-0280/930
- Color temperature 3000 K
- Color rendering index CRI > 90
- Module luminous flux 2640 lm
- Luminaire luminous flux * 1896 lm
- Luminaire luminous efficiency * 99,3 lm / W
50 659 K4
- Module designation 4x LED-0280/940
- Color temperature 4000 K
- Color rendering index CRI > 90
- Module luminous flux 2800 lm
- Luminaire luminous flux * 2011 lm
- Luminaire luminous efficiency * 105,3 lm / W
- preliminary data
Luminaire with trim ring
Before installing onto the mounting surface the luminaire housing must be
inserted into the trim ring (accessory).
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping. Lead
mains supply cable through the cable entry into the luminaire housing. Fix the
luminaire housing with enclosed or any other suitable fixing material onto the
mounting surface. It is imperative to use the enclosed gaskets. Make an earth
conductor connection.
Push silicone sleeves over the lines and make an electrical connection. For
digital control please use the connecting terminal DA, DA. In case this
terminal is not used the luminaire will be operated at full light output.
Insert the opal glass into the luminaire housing with sliding bolt glass
closure and turn the glass clockwise up to the stop. Place glass on the
luminaire housing and observe that the holding spring bolts fit into the
notches of the glass. Turn the glass clockwise until it is locked. Thus, you
reach a safe and vibration-resistant holding glass. To release the glass from
the luminaire housing, turn it counterclockwise.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve additional protection
against e. g. transients, etc. we recommend separate
overvoltage protection components. You can find them on our website at
www.bega.com.
Maintenance
The designation of the LED module is noted on a label in the luminaire. The
light color and light output of BEGA replacement modules correspond to those
of the modules originally fitted. The module
can be replaced by qualified persons using standard tools. Disconnect the
system. Unscrew the glass from the luminaire housing by turning it
counterclockwise. Clean glass and luminaire regularly with solvent-free
cleansers from dirt. Please follow the installation instructions for the LED
module. Screw in the glass by turning it clockwise as far as it will go. A
broken glass must be replaced Accessory For this luminaire metal trim rings
on 4 surfaces are optionally available. Trim rings are accessories and must be
ordered separately.
Item Part. No
Color white 13 062
Stainless steel 13 063
Chrome 13 064 Brass
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>