Beldray CD260623 All-In-1 MOP Bucket and Drainer Instruction Manual

Beldray CD260623 All-In-1 MOP Bucket and Drainer

Please retain instructions for future reference.
CAUTION

• Do not fill the bucket with boiling water.
• Use only on cool surfaces.
• Keep out of the reach of children.
• Not suitable for use with bleach.

GETTING STARTED

Remove the components from the box and remove all packaging.
Separate the mop head from the bucket and all poles.
Check that all parts are in operational condition before each use. If any parts are damaged, discontinue use.

CARE AND MAINTENANCE

Drain any remaining water from the bucket using the plug and clean it after every use. Wipe the bucket and wringer with a soft, damp cloth and allow to dry thoroughly. The mop pad is machine washable following the care label washing instructions. Never use bleach or fabric softener when using or washing the mop pad. Store in a cool dry place

IN THE BOX

• A) Steel pole with handle
• B) Detachable stainless steel pole (qty. 2)
• C) Mop head
• D} Mop pad
• E) Bucket
• F) Wringing system
• G) Drainage hole

DIRECTIONS FOR USE

STEP 1: Screw the stainless steel handle (A) into the end of one of the stainless steel poles (B) by twisting in a clockwise direction
STEP 2: Repeat this motion to attach the remaining pole (B).
STEP 3: Carefully push the connected poles into the clasp on the mop head (C).
STEP 4: Hook the mop pad (D) onto the tabs on the back of the mop head (C).
STEP 5: Remove the wringing system (F) from the bucket (E) and fill the bucket (E) with a solution of warm water and detergent or disinfectant made tothe manufacturer’s instructions.
STEP 6: Replace the wringing system (F) back onto the top of the bucket (E).
STEP 7: Plunge the mop head (C) into the bucket(E) to wet the mop pad. Use the wringer (F) side of the bucket to remove excess water.
STEP 8: To empty the bucket, (E) unplug the plug from the drainage hole (G) at the bottom of the bucket over an area with a clear drain.
STEP 9: To clean the mop pad, (D) release the mop pad from the tabs on the mop head and follow the care label washing instructions

DIRECTIONS FOR DISASSEMBLY/STORAGE
STEP 1: Push in the clasp on the mop head and carefully pull the handle out of the mop head.
STEP 2: Separate the poles by twisting in an anti- clockwise direction. The mop head and poles can be stored inside the bucket once fully dried

MOP HEAD CARE LABEL INSTRUCTION

• Wash at 30 °C.
• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

If this product does not reach you in an acceptable condition please contact our Customer Services Department at www.beldray.com. Please have your delivery note to hand as details from it will be required.
If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions).
Go to www.beldray.com/manuals.html and
search LA030223 to access the instruction manual for your product.

• Made in China.
• Distributed by: UP Global Sourcing UK Ltd.,
• Victoria Street, Manchester OL9 ODD. UK.
• Ultimate Products Europe Limited.,
• 19 Baggot Street Lower, Dublin DO2 X658. ROI.
• Beldray Trademark. All rights reserved.
• www.fsc.org

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>