OPTONICA 5626 LED Tube T8 Instruction Manual

OPTONICA 5626 LED Tube T8

Product Information

The LED Tube T8 City Line – HOME EDITION is a non-dimmable LED tube suitable for residential use. It has a lifespan of 25,000 hours and is available in different wattages and sizes. The product is designed for operation at a voltage range of 175-265V and a frequency of 50-60Hz. It has a light output of 720-1440 lumens and a color temperature of 6000K or 4000K. The LED Tube T8 has a protection class rating of L and a color rendering index (Ra) greater than 80. The power factor (PF) is above 0.9. The product is not suitable for use in emergency luminaires designed for double-capped fluorescent lamps.

Product Usage Instructions

1. Before installation, switch off the electricity.
2. Remove all existing fluorescent lamps from the fixture.
3. Remove the starter and replace it with the supplied starter.
4. Insert the LED tube lamp into the lampholder.
5. Switch on the electricity to activate the LED tube.

DIMENSION

SPECIFICATION

• Not suitable to be used in emergency luminaires designed for double-capped fluorescent lamp(s).

• Suitable for 175-265V 50-60Hz operation

• Light distribution

• Allowed ambient temperature -20°C to +40°C

Safety

• Before carrying out any work on electrical system, turn-off the mains power supply.
• The tubes shuld be installed only when the mains power supply is off and by qualified and authorized personnel.
• Do not touch the tube while it is on or immediately after it is turned off. Allow to cool before touching the tube.
• Do not cover the tube with paper, cloth or other material.
• Keep the tube away from sources of ignition.
• Ensure that the tube is fitten correctly and firmly.
• Do not touch the inside of the tube with liquid.
• Do not stare directly at the tube, in order to prevent light from damaging the eyes.
• The supplied starter is s ‘fake’ starter, and should only be used with  this LED tube light.

Installation

1. Swich off electricity
2. Remove all fluorescent lamps
3. Remove the starter and install the suplied one
4. Insert the LED tube lamp into the lampholder
5. Swich on electricity

Installation with LED Tube
I nstallation with Fluorescent Lamp

INFORMATION FOR USERS: in compliance with Directives 2002/95/EC, 2002/96/EC and 2003/108/C concerning the reductions in use of hazardous substances in electrical and electronic appliances, as well as waste disposal. The symbol shown above, if placed on the product or on its packaging, indicates that the product must be collected separately from other waste at the end of its life cycle. Separate collection of this appliance at the end of its life cycle is organized and managed by the manufacturer and follow the established procedure implemented by the manufacturer to allow separate collection of the appliance that has reached the end of its life cycle. Proper separate collection for the purpose or orwarding the decommissioned appliance to environmentally friendly recycling „treatment and disposal aids in avoiding possible negative effects on the enviroment and health, and favours re-use and/or re-cycling of the materials that comprise the appliance. Abusive disposal of the product by the holder will result in the applications of administrative sanctions as set forth be current standards.

IMPORTER : Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor;
Phone: +359 2 988 45 72;

References

• Optonica LED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>