Cloudy Bay HM1215SMXXX 12 Inch WiFi Smart Semi Circle Wall Light Instruction Manual
- June 12, 2024
- Cloudy Bay
Table of Contents
Cloudy Bay HM1215SMXXX 12 Inch WiFi Smart Semi Circle Wall Light
Product Information
- Product Name: HM1215SMXXX
- Description: 12 Inch Wi-Fi Smart Semi Circle Wall light
- Additional Information: ONE FOR SPARE
- Included Components: MOUNTING BRACKET
Product Usage Instructions
- Please discontinue using the product immediately if any visible defect is observed, and contact customer service for assistance.
- In case of any problems with the lights due to non-human reasons, please contact customer service. They will provide a brand-new replacement without requiring the return of the goods or offer a full refund.
- If you are not completely satisfied with the product after installation and prefer not to disassemble it, contact customer service immediately. They will provide comparable compensation.
- Use a Philips screwdriver to fix the MOUNTING BRACKET CC on the junction box (junction box excluded) using the SCREW AA.
- Pull out the live wire, neutral wire, and ground wire from the junction box. Connect the live wire to the LIGHT UNIT’s black wire, connect the neutral wire to the LIGHT UNIT’s white wire, and connect the ground wire to the LIGHT UNIT’s bare copper wire with BB, or firmly fix both ground wires on the mounting bracket’s green screw.
- Align the LIGHT UNIT center hole with the screw of the mounting bracket. Use a round screw cap to fix the LIGHT UNIT securely.
- If you only have a dimmer switch, set it to the highest level. For optimal light performance, it is strongly advised to use a regular On/Off switch instead.
- Tighten the thumb nuts on the metal ring to firmly fix the LIGHT UNIT on the wall.
- Once installation is completed, refer to the USER MANUAL & VOICE CONTROL GUIDE EE for further instructions to complete the setup.
For any questions, comments, suggestions, or complaints, please contact us at smart@cloudybaylighting.com. or info@cloudybaylighting.com. We will do our best to assist you. Thank you very much!
Installation Instructions
Component List:
- TURN OFF POWER SUPPLY BEFORE YOU START INSTALLATION!
- Use Philips screwdriver to fix MOUNTING BRACKET CC on junction box ( junction box excluded) with SCREW AA.
- Pull out live wire, neutral wire and ground wire from junction box, connect live wire to LIGHT UNIT’s black wire, connect neutral wire to LIGHT UNIT’s white wire, connect ground wire to LIGHT UNIT’s bare cooper wire with BB, or fix both ground wires on mounting bracket’s green screw firmly.
- Approach LIGHT UNIT to the MOUNTING BRACKET CC,till LIGHT UNIT center hole aim on the screw of mounting bracket, fix LIGHT UNIT with round screw cap.
- Tighten the thumb nuts on the metal ring to fix the LIGHT UNIT on wall firmly.
- Confirm the lighting fixture fixed securely.
- Installation is completed, please go ahead to USER MANUAL & VOICE CONTROL GUIDE EE to complete setting.
GENERAL : All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC approved wire only for input/output connections. Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions.
PRODUCT CARE
After Sales Service
- Please discontinue to use product right away if product shows any visible defect and contact customer service.
- If there is any problem with our lights for non-human reasons, please contact customer service, we will send you brand new replacement without need to returning goods or full refund.
- If you are not completely satisfied with product after installation but prefer not to disassemble, contact with us right away, we will provide comparable compensations.
3-Year Limited Warranty
LIMITED WARRANTY: This fixture is warranted to be free from defects in
workmanship and material for up to 3-years. Based upon reasonable household
usage, when used in accordance with package and included instructions. If this
fixture does not last for the time period guaranteed, manufacture will send
you a replacement fixture upon receipt of the returned fixture, register
receipt, and proof of purchase. To contact us, please email us at
smart@cloudybaylighting.com to find out how to return the fixture. We are
committed to making high quality products. Returning the fixture will help us
monitor and further improve product quality. This replacement is the sole
remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS
HEREBY EXPRESSLY EXCLUDED.
Note: This product is a smart light, using Direct Digital Controls rather
than triac dimming. Here is two dimming way for you reference:
- Download Cloudy Bay’s APP, go to product group or single product page, adjust the brightness and CCT of white light or color light on control panel; you can also go to home page, click product group or single product’s common function, adjust brightness and color temperature
- Control with smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully.
If you only have a dimmer at hand, set it to highest level only, if light performance is not good, we strongly advise you to change to a regular On/Off switch instead.
FCC
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equioment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
QUESTIONS? COMMENTS?
SUGGESTIONS? COMPLAINTS?
- Please contact with us through
- smart@cloudybaylighting.com. or
- info@cloudybaylighting.com. We will do our best
- to make it right for you. Thank you very much!
12 Inch Wi-Fi Smart Semi Circle Wall light
PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE Save
these instructions, as you may need them at a later date.