GOSSEN METRAWATT Z270U USB PD Power Pack User Manual
- June 13, 2024
- GOSSEN METRAWATT
Table of Contents
Z270U – USB PD Power Pack
3-447-160-15
1/8.22
Safety Instructions
Observe this documentation, in particular all included safety information, in order to protect yourself and others from injury, and to prevent damage to the product.
- Carefully and completely read and adhere to the documentation for the devices to be charged.
- Use the power pack in undamaged condition only. Pay particular attention to damage.
- Do not use the power pack after long periods of storage under unfavorable conditions (e.g. humidity, dust or extreme temperature).
- Only use the power pack in compliance with the specified technical data.
- Always use the plug attachment that matches the existing socket.
- Use only the interchangeable plug attachments furnished with the device.
Intended Use / Use for Intended Purpose
The USB PD power pack Z270U is exclusively intended for charging and operating
suitable USB devices.
Use for Other than Intended Purpose
Use of the product for any purposes other than those described in this
supplement, or in the documentation for the devices to be operated, is
contrary to use for intended purpose.
Liability and Guarantee
Gossen Metrawatt GmbH assumes no liability for property damage, personal
injury or consequential damage resulting from improper or incorrect use of the
product, in particular due to failure to observe the product documentation.
Furthermore, all guarantee claims are rendered null and void in such cases.
Opening the Accessory / Repairs
Unauthorized modification or opening of the accessory is prohibited.
Utilized Symbols
| The product may only be used in dry rooms.
---|---
| Federal Communications Commission (FCC) conformity marking
| European conformity marking
| Efficiency level VI according to US Department of Energy (DoE)
| Protection class 2
| The power pack may not be disposed of with household trash. Dispose of the
product in compliance with the applicable statutory regulations.
| Safety approval seal Electrical Testing Laboratories (ETL)
Technical Data
| Dimensions: (L × W × H) | 53 mm × 53 mm ×29.5 mm |
|---|---|
| Weight: | Approx. 145 g |
| Terminals: | USB-A |
USB-C
Input:| AC
100-240 V~50/
60 Hz, 1.5 A Max.
USB-A output:| 5.0 V 3.0 A
9.0 V 2.0 A
12.0 V 1.5 A
USB-C output:| 5.0/9.0 V 3.0 A
12.0/15 V 3.0 A
20.0 V 3.25 A
5.0~ 21.0 V 3.0 A
Total power:| Max. 65 W
Operating conditions:| 0 °C…+40 °C
5% … 90% rF
Storage conditions:| 20 °C…+85 °C
0% … 95% rF
Scope of Delivery
| 1 | USB PD power pack Z270U type A (US) |
|---|---|
| 1 | Plug attachment type C (EU) |
| 1 | Plug attachment type G (UK) |
| 1 | Plug attachment type I (AU) |
| 1 | Supplement (this document) |
Use
-
Prepare the plug at the power pack for the existing socket:
• US: Unfold the plug on the product.
• EU, UK, AU: Fold in the plug on the product.
Fit the required plug attachment onto the retracted plug. -
Plug the power pack into the socket.
-
Connect the USB device to be operated to the suitable USB port of the power pack using a matching USB cable.
© Gossen Metrawatt GmbH
Prepared in Germany
- Subject to change, errors excepted
- PDF version available on the Internet
All trademarks, registered trademarks, logos, product names, and company names are the property of their respective owners.
Gossen Metrawatt GmbH
Südwestpark 15
90449 Nürnberg
Germany
Phone +49 911 8602-0
Fax +49 911 8602-669
E-mail: info@gossenmetrawatt.com
Web:www.gossenmetrawatt.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>