GOSSEN METRAWATT HIT-Clip Z117A Magnetic Holder and Belt Strap Owner’s Manual
- June 12, 2024
- GOSSEN METRAWATT
Table of Contents
HIT-Clip Z117A Magnetic holder and belt
strap
for METRAHIT Multimeter & Calibrators with Rubber Holster
Owner’s Manual
HIT-Clip Z117A Magnetic Holder and Belt Strap
Attention!
**Instruments with Measuring Function Switching by Relay***
Operating these instruments in the proximity of strong magnets and/or magnetic
fields may interfere with the function of the relays in the instrument.
During operation, the magnet may not be fixed inside the protective rubber
cover in its stand-by position. A minimum distance of 5 cm from the housing
bottom must be observed.
- METRAHIT ENERGY, ULTRA (BT), PM PRIME (BT), 27M, 27I, H+E CAR, 30M; METRACAL MC
Note!
The Velcro fastener can also be used to attach a COIL Adapter XTRA oder COIL
Adapter 50mH to the protective rubber cove of the associated instrument.
© Gossen Metrawatt GmbH
Edited in Germany
- Subject to change without notice/Errors excepted
- A pdf version is available on the Internet
All trademarks, registered trademarks, logos, product names, and company names are the property of their respective owners.
Gossen Metrawatt GmbH
Südwestpark 15
90449 Nürnberg
Germany
Telefon +49 911 8602-0
Telefax +49 911 8602-669
E-Mail info@gossenmetrawatt.com
www.gossenmetrawatt.com
3-349-664-15
4/10.21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>