SOUNDMAX SM-CCR3064F MicroSD Media Player Instruction Manual

: October 30, 2023
: SOUNDMAX

Table of Contents

Important safeguards
Accessories
Installation/Connection
Dismantling the unit
Connection diagram
Control elements
General operations
Radio operations
USB/micro SD operations
Troubleshooting guide
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOUNDMAX SM-CCR3064F MicroSD Media Player Instruction Manual

DEAR COSTUMER!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. This device is intended for installation in a vehicle with onboard voltage 12 V. Designed to receive radio FM and playing MP3 from media USB and microSD (TF).

Important safeguards

The beginning of operation is the moment of the unit installation. Before use the device in winter it is
recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.
Use the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the screen and other components of device and can result an outage.
Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.
Do not use the unit in places where it can be exposed to water, moisture and dust.
Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.

Accessories

Reсeiver: 1 рс
12-pin connector cable: 1 рс
Mounting parts: 2 pсs
Release key Mounting сollar: 1 рс
Instruction manual: 1 рс

Installation/Connection

General notes

Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
Before finally installing the unit, connect the wiring and make sure that the unit works properly.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.
Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation.
After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.
Make the necessary wire connections. Ensure the connections are correct.
Install the unit into the sleeve until the side locks are fixed

Dash board
Sleeve tab to bend

Dismantling the unit

Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s negative (-) terminal.
Remove the metal strap attached the back of the unit (if attached).
Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard, for this you need to break the plastic plugs.

Connection diagram

1-FL+	2-FL-	3-RL+	4-RL-
5-B+	6-GND	7-FR+	8-FR-
9-RR+	10-RR-	11-ANT	12-ACC

Notes:

In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high volume level.
It is prohibited making the conductors of auto antenna and ground touch with each other.
The negative electrode of the speaker mustn’t be grounded, or else it may bun the player!

Attention, the 12-pin connector cable must be carefully matched with description on RL, connection of any wrong cables (WHITE-BLACK/ GREEN-BLACK/ PURPLE-BLACK/ GRAY-BLACK) with the Black cable (Ground) can be the reason of a malfunction of the bui in amplifier.

Control elements

Connection diagram

CLK/AMS/ button
VOL+ button
button
/MOD button
LCD display
Aux-in port
Micro SD card slot
USB port
Reset button (hole)
« button
VOL- button

General operations

Turning the unit on/off
Press the button to turn the unit on.
Press and hold this button again to turn the unit off

Reset the unit
When first using the device or after replacing the car battery, you must reset the unit. Press the RESET button (hole) with a pointed object (such as a ballpoint pen) to set the unit to its initial state. When some errors occur, you can also press the RESET button to return to factory settings, but note that it will erase clock setting and some memorized functions.

Mode selection
Press the MOD button repeatedly to select between Radio, AUX, USB and SD modes. Operation modes are indicated on the display. USB and SD mode is not available unless a memory card or a USB device is connected.

Volume control
Adjust the volume by pressing the VOL+ and VOL- buttons.

Clock
Press and hold the CLK button to show the time for 5 seconds. When the time is shown, press and hold the button until the clock starts to blink, then press the VOL-/VOL+ buttons to set the current hour. Then press the CLK button again and use the VOL-/VOL+ buttons to set the current minutes. After 5 seconds the system will confirm the time settings.

AUX input
AUX-in jack is intended for connecting an external audio equipment to amplify the sound. If connection is made correctly, the audio signal from the external source will be transmitted through the acoustics of the head unit. This enables to adjust the volume and quality of the sounding. For example, you can connect anMP3-player to listen to tracks using the car acoustic system.

Radio operations

Manual /automatic tuning

In radio mode press the AMS button to automatically search and save available radio channels.
After searching, the first preset channel will start to play automatically.
Press shortly or button. The radio will automatically search for the next frequency with a strong and clear signal.
Press and hold 4 or ¥ button, the unit will go to manual tuning mode. Press / buttons repeatedly to adjust the needed frequency manually. Recalling stations
Press shortly or pp] button. The radio will select the previous or next stored station.

USB/micro SD operations

Micro SD card slot
Carefully insert the micro SD card into the card slot on the front panel. Unit starts playback automatically. To disconnect the memory card, press it until a dlick, and then carefully pull it out from the slot.

USB port
Carefully connect a USB driver to the USB port on the front panel. Unit starts playback automatically.

USB/SD notes
USB format supports 2.0. Capadity: up to 32 GB. SD cards capacity: up to 32 GB. Supported file systems are FAT/FAT32. Note: Because of the great variety of products with SD-card slots and their sometimes quite manufacturer-spedific functions the producer can neither guarantee that all devices will be recognized nor that all operating options that are possible in theory will actually work. Before disconnecting a storage, switch the unit to another mode.

Next/Previous track
Press PP or 14 buttons to choose next or previous track. Press and hold this button to choose forward playback or backward playback; release the button to return to normal playback.

Play/Pause
Press PLAY/PAUSE button to pause the playback, press one more time to resume normal playback.

Troubleshooting guide

Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.

Symptom	Cause	Solution
No power	Wiring is connected incorrectly.	Make correct wiring connection.
The car Ignition Is not on.	If the power supply is properly connected to the

car accessory, switch the Ignition on.
The fuse is blown.| Replace the fuse.
No sound| Volume is in minimum.| Adjust volume to the desired level.
Wiring is not properly connected.| Check wiring connection.
The radio does not work| The antenna cable is not connected.| Insert the antenna cable properly.
The radio station automatic tuning does not work| The signals are too weak.| Select stations manually.

Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy water, and then wipe clean.