UMIDIGI G5A Smart Phone User Manual

G5A
MP38
Thanks for choosing UMIDIGl products

www.umidigi.com
Amazon service Email:amazonservice@umidigi.com

G5A Smart Phone

Thanks
Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valu- able time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with better user experience.

www.umidigi.com
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!

| | | |
---|---|---|---|---
VK:vk.com/umidigi| YouTube: youtube.com/umidigi| Facebook:facebook.com/Umidigi| Twitter: twitter.com/umidigi| Instagram:instagram.com/umidigi

UMIDIGI is registered trademark by
Shenzhen Youmi Intelligent Technology Co., Ltd.
All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information

PRODUCT HEX-VISION IMAGE

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.

VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.

CARD INSERT MANUAL

Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the slot. Be aware of the direction of the cut edge when placing the Nano-SIM card into the slot.

Reminder:
Please use standard Nano-SIM card. Please don’t use a non-standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card-rejection situation that may cause damage to the phone.

TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction of the cut edge. Place the card onto the tray and insert into the device.

Reminder:
Please turn off the phone before changing or replacing the TF card.TF card does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble from scratching the phone.

DUAL-SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting> Network Internet> Mobile network >Preferred network type

FINGERPRINT IDENTIFICATION

You can unlock the screen by fingerprint ID function. Click Setting> Security &Location> Fingerprint, please enter your fingerprint information by following the in structions on the screen.

Reminder:
Please ensure your finger clean and dry when giving your fingerprint information to the phone.
Please enter the information of your finger pulp for fingerprint information.
When unlocking the phone by fingerprint, please place your finger pulp on the touch |D sensor for about a second.

NETWORK CONNECTION

Connecting WLAN
Into the setting of WLAN via Settings>Network & linternet > Wi-Fi
When WLAN is on, a list available WiFi connection will appear. Click on the one you want to connect to, enter the password if  the network is encrypted, then click Connect. When it’s a public network, justclick Connect When the network shows “connected”, it is available to use

Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the phone will
search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click “Pair” on the dialog pop- up. Documents are available for transmission after Bluetooth pairing.

Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions.

WLAN Hot-spot Setting
Click on via Settings>Network & lnternet >Hotspo t& tethering >Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function.
When setting up WLAN hot-spot, enter your user name in “Network Name” and password, then click Save. Another device can use the WLAN hot-spot by searching and entering the password of the password.

Reminder:
Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot-spot depends on the signal strength and devices

CAMERA

Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to  take photos.
You can also choose other modes such as video recording, beautifying, panorama to take photos/videos.

INSTRUCTIONS FOR DUAL-CARD STANDBY

“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode  both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

SECURITY INFORMATION

Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware  specifications.
UMIDIGI holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause
the device or some applications fail to work properly.
Please prevent the device or the battery in extreme cold/hot condition. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by UMIDIGI. Incompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones.
Please do not place the battery or the phone onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating

SPECIFICATIONS

BASIC INFORMATION

4x ARM Cortex-A53 Mpcore up to 2.0GHz
GPU| IMG PowerVR GE8300 up to 660MHz
RAM| 4GB
ROM| 64GB
Battery| 5000mAh
Touch ID| Side Fingerprint

Display

Cameras

Connection(I/O)

Band| LTE FDD:B2/5/7/12
LTE TDD:B41
WCDMA:B2/5
GSM:B2/5
---|---
SIM/TF card| 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card
WIFI| IEEE802.11 ac/a/b/g/n
Bluetooth| Bluetooth 5.0
GNSS| GPS, Beidou, Glonass, Galileo
FM| Yes
Earphone Port| 3.5mm
USB Port| Type-C

Other Features

In the box

1x Phone
1x Screen Protector (pre-applied)
1x Phone Case
1x Type-C Cable
1x Power Adapter
1x SIM Tray Ejector
1x Quick Start Guide

Android is a trademark of Google LLC.

References

• UMIDIGI Smartphones, Smart Wearables | Official Website - UMIDIGI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>