Holybro 12028 M9N GPS Module User Guide
- June 13, 2024
- Holybro
Table of Contents
#12027 #12028 #12029
M9N GPS
User Guide
Descriptions
The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED
indicator, and a safety switch. There are 3 different connectors options for
different purposes.
This module ships with a baud rate of 38400 5Hz
Features and Specifications
- Ublox Neo-M9N module
- Industry leading –167 dBm navigation sensitivity
- Cold starts: 26s
- LNA MAX2659ELT+
- 25 x 25 x 4 mm ceramic patch antenna
- Rechargeable Farah capacitance
- Low noise 3.3V regulator
- Current consumption: less than 150mA @ 5V
- Fix indicator LEDs
- Protective case
- 26cm cable included
- Diameter 50mm total size, 32 grams with case.
Pin Map
SKU12027
Holybro M9N GPS (JST GHR1.25mm 10 pin cable):
This JST GH 10Pin connector can be use d on Pixhawk Series 10pin“GPS Module”
or “GPS1” input port.
SKU12028
Holybro M9N GPS for Pix32
(Molex1.25mm 6pin & 4pin &3pin cable):
These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 “Switch”, “GPS”,
and “I2C” input ports.
SKU12029
Holybro M9N 2nd GPS(JST GHR1.25m m 6pin cable)：
This JST GH 6Pin connector can be used
on Pixhawk Series 6pin“UART & I2C”or ”
GPS2″ input port as secondary GPS.
Dimensions
Package Included
M9N GPS Module 1
‘X’ type folding pedestal mount 1
Carbon rod 70mm & 140mm *1
Holyrood is a registered trademark of Holyrood, registered in the U.S. and
other countries.
© Copyright 2018 Holyrood. All Rights Reserved.
www.holybro.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>