Holybro M8N GPS User Guide
- June 3, 2024
- Holybro
Table of Contents
Holybro M8N GPS
Descriptions
The M8N GPS has a UBLOX M8N module, IST8310 compass, a tri-colored LED indicator, and a safety switch. There are 3 different connector options for different purposes. This module ships with a baud rate of 38400 5Hz
Features and Specifications
- Ublox Neo-M8N module
- Industry-leading –167 dBm navigation sensitivity
- Cold starts: 26s
- LNA MAX2659ELT+
- 25 x 25 x 4 mm ceramic patch antenna
- Rechargeable Farah capacitance
- Low noise 3.3V regulator
- Current consumption: less than 150mA @ 5V
- Fix indicator LEDs
- Protective case
- 26cm cable included
- Diameter 50mm total size, 32 grams with case.
Pin Map
SKU12012
Holybro M8N GPS (JST GHR1.25mm 10
pin cable) :
This JST GH 10Pin connector can be use d on Pixhawk Series 10pin“GPS Module” or “GPS1” input port.
| **
---|---
SKU12013**
Holybro M8N GPS for Pix32 (Molex1.25mm 6pin & 4pin &3pin cable) :
These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 “Switch”, “GPS”, and “I2C” input ports.
| **
SKU12014**
Holybro M8N 2nd GPS (JST GHR1.25m m 6pin cable) ：
This JST GH 6Pin connector can be used on Pixhawk Series 6pin“UART & I2C”or ” GPS2″ input port as secondary GPS.
| ****
Dimensions
Package Included
- M8N GPS Module *1
- ‘X’ type folding pedestal mount *1
- Carbon rod 70mm & 140mm *1
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries. © Copyright 2018 Holybro. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>