Holybro Tekko32 F4 BigFET 4in1 50A ESC User Manual
- June 4, 2024
- Holybro
Table of Contents
Holybro Tekko32 F4 BigFET 4in1 50A ESC
Instructions
F4 MCU / PWM output up to 96K / 4~6S / BLHELI32
Tekko32 F4 BigFET are made for those that uses 20×20 mount and also need the
power of big MOSFET. The F4 MCU & quality big MOSFET onboard will provide
smooth control, quick response, and big power
for racers and freestyle pilots.
Features:
- New F4 MCU, much faster than F3 & F0
- PWM output up to 96K (default 48K)
- 20×20 Mount design with big MOSFET
- Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Specification:
- Continuous Current: 50A x4
- Burst Current: 60A x4
- Supports 4-6S battery
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- No output BEC
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 168
- Dimensions: 39×36.5x6mm / Weight: 11.8g
- Mounting holes: M4 30.5×30.5mm (M3 grommets included)
Pin Map:
Package includes:
Tekko32 F4 BigFET 4in1 50A ESC 1
M3 Anti-Vibration Silicone Grommet Insert 4
Electrolytic capacitor: 1000uF 35v 1
8pin to 8pin 1mm pitch 65mm cable 1
8pin to 8pin 1mm pitch 25mm cable *1
Some Tips:
- BLHeli_32 ESC Firmware Overview
- GitHub
Holybro is a registered trademark of Holybro, registered in the U.S. and other
countries.
©Copyright 2018 Holybro. All Rights Reserved
www.holybro.com
References
- Holybro - Build your drone from here – Holybro Store
- BLHeli/BLHeli_32 ARM at master · bitdump/BLHeli · GitHub
- oscarliang.com/blheli-32-overview/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>