Holybro 12027 M9N GPS Compass Module User Guide
- June 6, 2024
- Holybro
Table of Contents
Holybro 12027 M9N GPS Compass Module
Descriptions
The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz
Features and Specifications:
- Ublox Neo-M9N module
- Industry leading –167 dBm navigation sensitivity
- Cold starts: 26s
- LNA MAX2659ELT+
- 25 x 25 x 4 mm ceramic patch antenna
- Rechargeable Farah capacitance
- Low noise 3.3V regulator
- Current consumption: less than 150mA @ 5V
- Fix indicator LEDs
- Protective case
- 26cm cable included
- Diameter 50mm total size, 32 grams with case.
**Pin Map
**
SKU12027
Holybro M9N GPS (JST GHR1.25mm 10 pin cable):
This JST GH 10Pin connector can be used on Pixhawk Series 10pin“GPS Module”or
“GPS1” input port.
SKU12028
Holybro M9N GPS for Pix32
(Molex1.25mm 6pin & 4pin &3pin cable):
These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 “Switch”, “GPS”,
and “I2C” input ports.
SKU12029
Holybro M9N 2nd GPS(JST GHR1.25m m 6pin cable)：
This JST GH 6Pin connector can be used on Pixhawk Series 6pin“UART & I2C”or
“GPS2” input port as secondary GPS.
Dimensions
DIMENSIONS IN MILLIMETERS
Package Included:
M9N GPS Module 1
‘X’ type folding pedestal mount 1 Carbon rod 70mm & 140mm *1
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries. © Copyright 2018 Holybro. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>