Holybro 31097 Tekko32 F4 Metal 4in1 65A ESC Instructions
- June 3, 2024
- Holybro
Table of Contents
Holybro 31097 Tekko32 F4 Metal 4in1 65A ESC Instructions
F4 MCU / BLHELI32 / Metal case mosfet / PWM output 128K / 4~6S
The New BLHELI32 ESC adapted the F4 MCU, which will provide a smoother control and faster response speed.
SPEC
- F4(M4 Core) 108Mhz MCU with BLHELI32 firmware
- Maximum PWM output upto128K (default 96K)
- The 4in1 has onboard analog current sensor, and TLM function (then no current reading over TLM)
- Uses metal case mosfet for better heat dissipation
- No output BEC
- Supports Lipo 4-6S
- Extra capacitor needed for 6s (1000uf 35v for 6s usage.)
- Dimensions: 43 x 44mm
- Mounting holes: 30.5×30.5mm(M4)
- Weight: 15.8g
Notice:
The air flow is very important if you want to run this 4in1 in high current.
The input cable (from Lipo to 4in1) should be at least 12AWG and well
soldered.
Package included
- Tekko32 F4 Metal 4in1 65A ESC *1
- M3 Anti-Vibration Silicone Grommet Insert *4
- Electrolytic capacitor: 1000uF 35v *1
- 8pin to 8pin 1mm pitch 65mm cable *1
- 8pin to 8pin 1mm pitch 25mm cable *1
PIN MAP
Some Tips:
- BLHeli_32 ESC Firmware Overview
- GitHub
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>