BEGA 24 196 Ceiling And Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 24 196 Ceiling And Wall Luminaire Instruction Manual
Application
Unshielded ceiling and wall luminaire with high protection class.
For a variety of interior and exterior lighting applications.
Product description
Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Colour white
Opal glass
Silicone gasket
2 mounting holes ø 5.5 mm
Distance apart 190 mm
2 cable entries for through-wiring of mains
supply cable ø 7-10.5 mm
Lampholder E 27
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK05
Protection against mechanical impacts < 0.7 joule
Safety
The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
Luminaire with screw base E 27
Lamp output max. 60 W
This product contains light source of energy efficiency class E
Supplied lamp
BEGA LED lamp 13 584
LED Retrofit 7 W · 805 lm · 3000 K
Luminaire efficiency: 57.7%
Additional BEGA LED lamps are available for this luminaire:
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
Insert lamp.
Make sure that gasket is positioned correctly.
Place the opal glass onto the luminaire base in such a way that both yellow
arrow markers align to each other and screw the glass clockwise into the base
up to the stop.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Relamping · Maintenance
Disconnect the electrical installation.
Open the luminaire and clean.
Use only solvent-free cleaning agents. Change the lamp.
Check the gasket and replace, if necessary.
Close the luminaire.
For cleaning, do not use high pressure cleaners.
Spares
LED lamp 3000K: 13 584
Lampholder: 63 000 052
Spare glass: 75 004 028
Gasket: 83 001 634
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
Read More About This Manual & Download PDF: