LINDY 10m USB 3.0 A/B Active Cable User Manual

: June 13, 2024
: LINDY

Table of Contents

LINDY 10m USB 3.0 A/B Active Cable
Product Information
Product Usage Instructions
Additional Information
Package Contents
Features
Installation & Operation
Recycling Information
CE/FCC Statement
FCC Certification
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LINDY 10m USB 3.0 A/B Active Cable

Product Information

Product Name : 10m USB 3.0 A/B Active Cable
Model Number : 43098
Manufacturer: LINDY-Elektronik GmbH
Website: lindy.com
Compatibility: USB Type A-equipped computers
Data Transfer Rate: Up to 5Gbps
Connectors: USB A male to USB B male
Cable Length : 10m
Power: Bus-powered
Warranty: 2 years

Product Usage Instructions

Connect the USB A plug of the 10m USB 3.0 Active Cable to a free USB port on your computer.
Your computer will recognize the new hardware and install any required drivers automatically.
Connect the USB B plug of the 10m USB 3.0 Active Cable to your USB device.

Note: It is recommended to use this extender with low power or self- powered USB peripherals. High power-consuming devices should only be used if they have their own power supply.

Additional Information

This product allows Type B devices such as printers to be connected directly to your computer at longer distances.
The Lindy USB 3.0 Active Cable uses built-in active electronics to extend the cable length of a USB 3.0 device by an additional 10m while supporting data transfer rates of up to 5Gbps.
This extension cable can be installed quickly and with minimum fuss due to its plug-and-play functionality.

Package Contents

10m USB 3.0 Active Cable
This manual

Features

USB 3.2 / 3.1 Gen 1 / USB 3.0 specification, backwards compatible with USB 2.0 / 1.1
Supports USB 3.2 / 3.1 Gen 1 / USB 3.0 SuperSpeed data transfer rate up to 5Gbps
Interfaces: USB A male to USB B male
Ideal for direct device connection
Cable length: 10m
Bus powered operation
Plug & Play Installation
Compatible with USB enabled operating systems

Installation & Operation

Connect the USB A plug of the 10m USB 3.0 Active Cable to a free USB port on your computer. Your computer will recognize the new hardware and install any required drivers automatically. Now connect the USB B plug of the 10m USB 3.0 Active Cable to your USB device. It is recommended that this extender is used with low power or self powered USB peripherals and not high power consuming devices, unless they have their own power supply.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen entspricht
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.