Hytronik HBHC25 PIR Standalone Motion Sensor with Bluetooth 5.0 SIG Mesh Owner’s Manual

PIR Standalone Motion Sensor with 5.0 SIG Mesh
HBHC25
Low-bay
HBHC25/R
Reinforced Low-bay W
HBHC25/W
Wide range Low-bay
HBHC25/H
High-bay
HBHC25/RH
Reinforced High-bay

App Features

| Quick setup mode & advanced setup mode
---|---
Tri-level control
Daylight harvest
Circadian rhythm (Human centric lighting)
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site conguration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Dusk/Dawn photocell (Twilight function)
Push switch conguration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (primary & secondary)
Internet-of-Things (IoT) featured
Device rmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Dynamic daylight harvest auto-adaptation
Power-on status (memory against power loss)
Ofine commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean BLE switches
Continuous development in progress…

Hardware Features

| 80mA DALI broadcast output in 2 channels:- 50mA (Channel 1)- 30mA (Channel 2)
---|---
Support to control DT8 LED drivers
3 Push inputs for exible manual control
Keep real time for up to 2 weeks against power failure
IP20/IP54 Ceiling/Surface mount box available as accessory
Two types of blind inserts / blanking plates
User-friendly design for installation
High bay version available (up to 15m in height)
5-year warranty

Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)

Web app/platform: www.iot.koolmesh.com

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| 5.0 SIG Mesh
Sensor Data
Sensor Model| PIR max* detection range
HBHC25| Installation Height : 6m
Detection Range(Ø) :9m
HBHC25/R| Installation Height : 6m
Detection Range(Ø) :10m
HBHC25/W| Installation Height : 6m
Detection Range(Ø) :18m
HBHC25/H| Installation height ：15m (forklift) 12m (person)
Detection range (Ø) ：24m
HBHC25/RH| Installation height ：20m (forklift) 12m (person)
Detection range (Ø) ：40m
Detection angle| 360
Input & Output Characteristics 
Stand-by power| <1W
Operating voltage| 220~240VAC  50/60Hz
DALI Channel 1| 50mA, Max. 25 devices
DALI Channel 2| 30mA, Max. 15 devices
Safety & EMC
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1/-2-1
AS/NZS60669-1/-2-1
RED| EN300328, EN301489-1/-17
Certification| CB, CE , EMC, RED, RCM
Environment
Operation temperature| Ta: -20 °C ~ +50 °C
IP rating| IP20

• For more details of detection range, please refer to “detection pattern” section.

Placement Guide and Typical Range

Smart Phone to Device Range

Wire Preparation

Subject to change without notice.

The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh.
This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.
Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

Mechanical Structure & Dimensions

1. Ceiling (drill hole Ø 66~68mm)
2. Carefully prise off the cable clamps.
3. Make connections to the pluggable terminal blocks.
4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
5. Fit detection blind (if required) and desired lens.
6. Clip fascia to body.
7. Bend back springs and insert into ceiling.

Detection Pattern & Optional Accessories

HBHC25 (Low-bay)
HBHC25: Low-bay flat lens detection pattern for single person @ Ta = 20 °C (Recommended ceiling mount installation height 2.5m-6m)

HBHC25/R (Reinforced Low-bay)
HBHC25/R: Low-bay convex lens detection pattern for single person @ Ta = 20 °C (Recommended ceiling mount installation height 2.5m-6m)

HBHC25/W (Wide range Low-bay)
HBHC25/W: Low-bay convex lens detection pattern for single person @ Ta = 20 °C (Recommended ceiling mount installation height 2.5m-6m)

HBHC25/H (High-bay)
HBHC25/H: High-bay lens detection pattern for forklift @ Ta = 20 °C (Recommended ceiling mount installation height 10m-15m)

HBHC25/RH (Reinforced High-bay with 3-Pyro)
HBHC25/RH: Reinforced high-bay lens detection pattern for forklift @ Ta = 20 °C (Recommended ceiling mount installation height 10m-20m)

Big and small silicon gasket used to make IP54 degree protection when HBHC25 series device mounted into HA03 housing for ceiling mount

Typical Application for Classroom (Human Centric Lighting)

Different from other complex system, Hytronik offer a simple yet decentralized one-stop solution to achieve Human Centric lighting. It cuts at least 50% to 60% in costs as compared to traditional complex wiring system. This solution is  based on Bluetooth together with an intuitive and portable app; it does not require complicated PC tools to set up and configure. What’s more, our Bluetooth solution is futureproof with OTA upgrade capability. With services of tailor  making Bluetooth solution including app, products, server and cloud, this solution brings flexibility and versatility to adapt to each customer’s requirements at affordable prices.

| What you need| What you get
---|---|---
| HBHC25 x 1| • Bluetooth enabled and controllable via app
• Human Centric Function
• 2 DALI channels for whiteboard/electronic
• PIR motion sensing display area and student area independently
• Daylight Harvest
| Push switches x 3| •Manual control: brightness adjustment, colour tuning, recall scenes etc.
| HHC2045 x 8 for LED panels HHC2050L x 4 for linear LED lights| •Tunable white LED driver (Can also be any other DALI DT8 drivers)
| HBP02 x 1 (Optional)| • Bluetooth touch panel
• Switchable between each scene
• Can recall up to 6 scenes
• Brightness adjustment,colour tuning
| QCB01 x 2 with cables and plugs (Optional)| • Labour cost saved significantly
• Simplify wiring on site via plug ‘n’ play
• Hassle-free maintenance after installation
| HBGWO1 gateway x 1 (Optional)| • Remote control access
• Data collection and analysis
| Free app| • Futureproof via OTA
• Off-line commissioning
| Cloud & server| • Settings data backup
• Accounts security

Wiring Diagram

Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.
Detailed Push switch configurations can be set on Koolmesh app.

– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (1 second)| – Dimming
– Colour tuning – Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information/Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>