HYTRONIK HED6045/BT Bluetooth Dimmable LED Drivers with Bluetooth 5.0 SIG Mesh Owner’s Manual

LED Drivers with 5.0 SIG Mesh
HED6045/BT
Dimmable Driver & Constant Current

Product Description

HED6045/BT is a Bluetooth dimmable LED driver, with maximum power output of 45W. It comes with Switch-Dim interface by using Push switch (retractive switch) and of course Bluetooth dimming interface. It is ideal for direct projects or new luminaires design for lighting manufacturers. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects. Meanwhile, simple device setup and commissioning can be done via koolmesh app.

App Features

| Quick setup mode & advanced setup mode
---|---
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site conguration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Push switch configuration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (primary & secondary)
Internet-of-Things (IoT) featured
Device firmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Power-on status (memory against power loss)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean switch HBES01/W & HBES01/B
Continuous development in progress…

Hardware Features

| Switch-Dim
---|---
Flicker free (1-100%)
Bluetooth dimmable control
Insulated terminal cover with cord restraint
Active PFC design
Logarithmic Dimming
Linear Dimming
Configurable constant current (CC) output via DIP switch
Loop-in and loop-out terminals for efficient installation
Open-circuit Protection
Short-circuit Protection
Overload Protection
5-year warranty, designed for long lifetime up to 50,000 hours

• Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors,such as HBIR29, HCD038/BT + sensor head etc.

Web app/platform: www.iot.koolmesh.com

Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)

Output Configuration

Warning: Please make sure the correct current is selected before starting the driver!

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| 5.0 SIG Mesh
Input
Mains Voltage| 220~240VAC  50/60Hz
Mains Current| 0.24~0.22A
Power Factor| 0.95
Max. Efficiency| 89%
Psb/Pno| <0.5W
Output
Output Current| 350mA~1050mA
Output Voltage| 10-54V
Uout Max.| 75VDC
Turn-on Time| <0.5s
Dimming Interface| Switch-Dim
Environment
Operation Temp.| -20 ~ +50 ℃
Case Temp. (Max.)| 80 ℃
IP Rating| IP20
Safety and EMC
EMC Standard| EN55015, EN61547,
EN61000-3-2/-3-3, EN300328,
EN301489-1/-17, EN50663
Safety Standard| EN61347-1, EN61347-2-13
Dielectric strength| Input →output: 3000VAC / 5mA /1min
Abnormal protection| Output short-circuit protection
Overload Protection
Open-circuit Protection
Max. output power/current/voltage range
HED6045/BT| 3.5-19W/ 350mA /10-54VDC
5-27W/ 500mA /10-54VDC
6-32W/ 600mA /10-54VDC
7-38W/ 700mA /10-54VDC
8-42W/ 800mA /10-52VDC
9-45W/ 900mA /10-50VDC
9.5-45W/ 950mA /10-47VDC
10-45W/ 1000mA /10-45VDC
10.5-44W/ 1050mA /10-42VDC

Mechanical Structure & Dimensions

Built-in installation

Stand-alone installation

Wire Preparation

To make or release the wire from the terminal, use a screwdriver to push down the button.

Wiring Diagram

Note: There is no need for any hardwirings on “push” terminal between one driver to another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control  any Bluetooth driver through the app commissioning.

Loading and In-rush Current

Circuit Breaker Information

The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230)  x 60%.
Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different types of circuit breaker used and installation environment.

Performance Characteristics

Dimming Characteristics

Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up to 64 LED drivers maybe connected to one switch. Detailed Push switch configurations can be set on Koolmesh app.

– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (1 second)| – Dimming
– Colour tuning – Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information/Documents

1. Regarding precautions for LED driver installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>