HYTRONIK HMW84 IP65 HF Motion Sensor with Bluetooth 5.0 SIG Mesh Owner’s Manual
- June 12, 2024
- HYTRONIK
Table of Contents
IP65 HF Motion Sensor with 5.0 SIG Mesh
HMW84 (High Bay)
Tri-level Control & Daylight Harvest for Independent DALI/DALI2
Product Description
HMW84 is a Bluetooth DALI high-bay HF motion sensor, with capability of up to
15m installation height. It is designed with robust IP65 structure, and offers
3 different installation methods. With Bluetooth wireless mesh networking, it
makes communication much easier without any hardwiring, which eventually adds
values to luminaires and saves costs for projects.
Meanwhile, simple device setup and commissioning can be done via koolmesh app.
App Features
| Quick setup mode & advanced setup mode
---|---
Tri-level control
Daylight harvest
Circadian rhythm (Human centric lighting)
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site conguration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Dusk/Dawn photocell (Twilight function)
Push switch conguration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (primary & secondary)
Internet-of-Things (IoT) featured
Device rmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Dynamic daylight harvest auto-adaptation
Power-on status (memory against power loss)
Ofine commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean BLE switches
Continuous development in progress…
Hardware Features
| 40mA DALI/DALI2 Broadcast output
---|---
3 installation methods
IP65 design
High-bay (up to 15m height)
5-year warranty
Web app/platform: www.iot.koolmesh.com
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Technical Data
Input Characteristics
Model No.| HMW84
Mains voltage| 220~240VAC 50/60Hz
Stand-by power| <1W
Load ratings:|
Capacitive| 800VA
Resistive| 1000W
Warming-up| 20s
Safety and EMC
EMC standard (EMC)| EN55015, EN61000-3-2/-3-3
Safety standard (LVD)| EN60669-1, EN60669-2-1
Radio Equipment (RED)| EN300440, EN301489-1/-17/-3, EN62479,EN300328
Certification| CB, CE , EMC, RED, RCM
Sensor Data
Model No.| HMW84
Sensor principle| High Frequency (microwave)
Operation frequency| 5.8GHz +/- 75MHz
Transmission power| <0.2mW
Detection range| Max installation height：15m
Max detection range：10m (diameter)
Detection angle| 360
Environment
Operation temperature| Ta: -20 °C ~ +70 °C
IP rating| IP65
Mechanical Structures and Installations
For more details, please refer to user manual.
A. Ceiling mount
B. Screw to the Luminaire by conduit
C. Attach to the shade by clamp
Note:We recommend the mounting distance between sensor to sensor should be more than 2m to prevent sensors from false-triggering.
Detection Pattern
Wiring Diagram
Placement Guide and Typical Range
Smart Phone to Device Range
The smart device with the App installed will have a typical range of 10m, but
varies from device to device. During commissioning, the installer will need to
be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will
start communicating within the wireless mesh.
This means that once the network is complete, all devices are accessible from
the smart device when in a 20m range of a single point.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>