HYTRONIK HBIR29-2CH PIR Independent Motion Sensor Instruction Manual

HYTRONIK HBIR29-2CH PIR Independent Motion Sensor Instruction Manual

Product Description

HBIR29/2CH is Bluetooth PIR standalone motion sensors with two independent channel outputs. One is DALI channel output (50mA DALI power supply built in), which can control up to 25 LED drivers. The other is voltage-free contact, which is NC (normally closed contact). It is ideal for typical indoor applications such as office, classroom, healthcare and other commercial areas. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects (especially for retrofit upgrade projects!). Meanwhile, simple device setup and commissioning can be done via app

App Features

Quick setup mode & advanced setup mode

Web app/platform for project deployment & data analysis

Koolmesh Pro app on iPad for on-site configuration

Floorplan feature to simplify project planning

coming soon

One-key device replacement

Device social relations check

Staircase function (primary & secondary)

Remote control via gateway support HBGW01

Heat map

Dynamic daylight harvest auto-adaptation

Grouping luminaires via mesh network

Scenes

Dusk/Dawn photocell (Twilight function)

Tri-level control

Daylight harvest

Circadian rhythm (Human centric lighting)

Push switch configuration

Detailed motion sensor settings

Schedule

Astro timer (sunrise and sunset)

Power-on status (memory against power loss)

Ofine commissioning

Bulk commissioning (copy and paste settings)

Different permission levels via authority management

Network sharing via QR code or keycode

Interoperability with Hytronik Bluetooth product portfolio

Compatible with EnOcean BLE switches

Internet-of-Things (IoT) featured

Device firmware update over-the-air (OTA)

Continuous development in progress.

Hardware Features

50mA DALI broadcast output

Support to control DT8 LED drivers

VFC: Volt-free Contact/Dry Contact ON/OFF relay switch:
− 24VDC@2A
− 250VAC@2A

NC contact

2 Push inputs for exible manual control

IP20/IP54 Ceiling/Surface mount box available as accessory

Various PIR lens and blind inserts options

User-friendly design for installation

High bay version available (up to 15m in height)

5-year warranty

Bluethooth 5.0 SIG mech

Smartphone app for both iOS & Android platform

for iOS

for Android

Koolmesh Pro app for iPad

for iPad

Web app/platform:www.iot.koolmesh.com 

Web

for Web

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor| 10~30m
Protocol| 5.0 SIG Mesh
Sensor Data

Sensor Model| PIR detection
HBIR29/2CH| Installation Height : 6m
Detection Range(Ø) :9m
HBIR29/2CH/R| Installation Height : 6m
Detection Range(Ø) :10m
HBIR29/2CH/W| Installation Height : 6m
Detection Range(Ø) :18m
HBIR29/2CH/H| Installation height：15m (forklift)12m (person)
Detection range (Ø)：24m
HBIR29/2CH/RH| Installation height：20m (forklift)12m (person)
Detection range (Ø)：40m
Detection angle| 360O
Input & Output Characteristics

Operating voltage| 220~240VAC   50/60Hz
Load ratings| Channel 1: Max. 25 devices, 50mA
Channel 2: 24VDC@2A,250VAC@2A
Warming-up| 20s
Safety & EMC

EMC standard (EMC)| EN55015,  EN61000,  EN61547
Safety standard (LVD)| EN60669-1, EN60669-2-1 AS/NZS60669-1/-2-1
RED| EN300328,     EN301489-1/-17
Certification| CB, CE, EMC, RED, RCM, UKCA
Environment

Operation temperature| Ta: -20OC ~ +50OC
IP rating| IP20

Mechanical Structure & Dimensions

1. Ceiling (drill hole Ø 66~68mm)
2. Carefully prise off the cable clamps.
3. Make connections to the pluggable terminal blocks.
4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
5. Fit detection blind (if required) and desired lens.
6. Clip fascia to body.
7. Bend back springs and insert into ceiling.

Wire Preparation

Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

Placement Guide and Typical Range

The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.

Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh.
This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.

Detection Pattern & Optional Accessories

HBIR29/2CH (Low-bay)

| HBIR29/2CH : Low-bay flat lens detection pattern for singl e perso n @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m )
| | Mount height| Tangential (A)| Radial (B)
2.5m| max 50m2 (Ø = 8m)| max 13m2 (Ø = 4m)
3m| max 64m2 (Ø = 9m)| max 13m2 (Ø = 4m)
4m| max 38m2 (Ø = 7m)| max 13m2 (Ø = 4m)
5m| max 38m2 (Ø = 7m)| max 13m2 (Ø = 4m)
6m| max 38m2 (Ø = 7m)| max 13m2 (Ø = 4m)

Optional Accessory — Ceiling/Surface Mount Box: HA03

Optional Accessory — Blind Insert for Blocking Certain Detection Angles

Blind Option 1 — Aisle Detection

Blind Option 2 — 180O Detection

| 2. HBIR29/2CH/R (Reinforced Low-bay)
---|---
HBIR29/2CH/R: Low-bay convex lens detection pattern for single person @ Ta = 20O C (Recommended ceiling mount installation height 2.5m-6m)
A: Tangential movement
| B: Radial movement
| Mount height| Tangential (A)| Radial (B)
2.5m| max 79m2 (Ø = 10m)| max 20m2 (Ø = 5m)
3m| max 79m2 (Ø = 10m| max 20m2 (Ø = 5m)
4m| max 64m2 (Ø = 9m)| max 20m2 (Ø = 5m)
5m| max 50m2 (Ø = 8m)| max 20m2 (Ø = 5m)
6m| max 50m2 (Ø = 8m| max 20m2 (Ø = 5m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Optional Accessory — Blind Insert for Blocking Certain Detection Angles

Blind Option 1 — Aisle Detection

Blind   Option 2 — 180O Detection

Big and small silicon gasket used to make IP54 degree protection when

HBIR29/2CH series device mounted into HA03 housing for ceiling mount

| 3. HBIR29/2CH/W (Wide range Low-bay)
---|---
HBIR29/2CH/W: Low-bay convex lens detection pattern for single person @ Ta = 20O C (Recommended ceiling mount installation height 2.5m-6m)
A: Tangential movement
| B: Radial movemen
| Mount height| Tangential (A)| Radial (B)
2.5m| max 254m2 (Ø = 18m)| max 28m2 (Ø = 6m)
3m| max 254m2 (Ø = 18m)| max 28m2 (Ø = 6m)
4m| max 154m2 (Ø = 14m| max 28m2 (Ø = 6m)
5m| max 113m2 (Ø = 12m)| max 28m2 (Ø = 6m)
6m| max 79m2 (Ø = 10m)| max 13m2 (Ø = 4m)

Optional Accessory — Ceiling/Surface Mount Box: HA03

| 4. HBIR29/2CH/H (High-bay)
---|---
HBIR29/2CH/H: High-bay lens detection pattern for forklift @ Ta = 20O C (Recommended ceiling mount installation height 10m-15m)
A: Tangential movement
| B: Radial movement
| Mount height| Tangential (A)| Radial (B)
10m| max 380m2 (Ø = 22m| max 201m2 (Ø = 16m)
11m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
12m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
13m| max 452m2 (Ø = 24m)| max 177m2 (Ø = 15m)
14m| max 452m2 (Ø = 24m)| max 133m2 (Ø = 13m)
15m| max 452m2 (Ø = 24m)| max 113m2 (Ø = 12m)
| HBIR29/2CH/H: High-bay lens detection pattern for single person @ Ta = 20O C (Recommended ceiling mount installation height 2.5m-12m
A: Tangential movement
| B: Radial movement
| Mount height| Tangential (A)| Radial (B)
2.5m| max 50m2 (Ø = 8m)| max 7m2 (Ø = 3m)
6m| max 104m2 (Ø = 11.5m| max 7m2 (Ø = 3m)
8m| max 154m2 (Ø = 14m)| max 7m2 (Ø = 3m)
10m| max 227m2 (Ø = 17m)| max 7m2 (Ø = 3m)
11m| max 269m2 (Ø = 18.5m)| max 7m2 (Ø = 3m)
12m| max 314m2 (Ø = 20m)| max 7m2 (Ø = 3m)

Optional Accessory — Ceiling/Surface Mount Box: HA03

Optional Accessory — Blind Insert for Blocking Certain Detection Angles

Blind Option 1 — Aisle Detection

Blind Option 2 — 180O Detection

Big and small silicon gasket used to make IP54 degree protection when HBIR29/2CH series device mounted into HA03 housing for ceiling mount

Small silicon water-proof gasket dimension(size:mm

Big silicon water-proof gasket dimension(size:mm)

Wiring Diagram

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non latching (momentary) wall switches. Detailed Push switch congurations can be set on Koolmesh app.

only            – Quit manual mode-   Turn off only           – Do nothing
Double push| –   Turn on only            – Quit manual mode-   Turn off only – Do nothing-   Recall a scene
Long press (≥1 second)| –   Dimming-   Colour tuning-   Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents

1. To learn more about detailed product features/funcvtions, please refer to
   www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions

2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation

3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation

4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors

5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.
Edition: 19 Apri. 2022 Ver. A0 Page 8/8

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>