HYTRONIK HED1009-BT Bluetooth Dimmable LED Drivers User Manual

HYTRONIK HED1009-BT Bluetooth Dimmable LED Drivers User Manual

Product Description

This series of LED drivers are Bluetooth dimmable LED drivers, with maximum power output ranging from 9W to 40W. They all come with Switch-Diminterface by using Push switch (retractive switch) and of course Bluetooth dimming interface. It is ideal for direct projects or new luminaires design for lighting manufacturers. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects. Meanwhile, simple device setup and commissioning can be done via app.

App Features

  Quick setup mode & advanced sefup mode
 Floorplan feature to simplify project planning
 Web app/plform for dedicated project management
 Koolmesh Pro iPad version for onsite configuration
 Grouping luminaires via mesh network
 Scenes
 Detailed motion sensor seffings
 Push switch configuration
 Schedule to run scenes based on time and date
 siro fimer (sunrise and sunse)
 Stircase funciion [primary & secondary)
 Internetof Things (IoT) featured
 Device firmware update overthexair [OTA]  Device socidl relations check
 Bulk commissioning (copy and paste setiings)
 Poweron status [memory against power loss)
 Offline commissioning
 Different permission levels via auhority management
 Network sharing via QR code or keycode
 Remote control via gateway support HBGWOT1
 Interoperability with Hytronik Bluetooth product portfolio
 Compatible with EnOcean switch EWSSB/EWSDB
 Continuous development in progress

Hardware Features

 Switch Dim
 PWM 1KHz (1-100%] (Except for HED6010/BT)
 Bluetooth dimmable control
 Insulated terminal cover with cord resiraint
 Active PFC design
 Logarithmic Dimming
Linear Dimming
 Configurable constant current (CC) output via DIP switch
 looprin and loop-out terminals for efficient installat”
Openrcircit Protection
 Shortcircuit Protection
 Overload Protection
 Syear waranty, designed for long lifetime up to 50,000 hours

Certain scenes which require exiernal photocell can be achieved by using together with Hytronik Bluetooth sensors,such as HBIR29, HCDO38/BT + sensor head efc

APPS

Smartphones app for both iOS & Android platform

Koolmesh pro app for Ipad

Web app/platform: www.iot.koolmesh.com

Output Configuration

HED1009/BT, YW

600mA|
---|---
500mA|
400mA|
350mA|
300mA|
250mA|
200mA|
|

HED6010/BT, 12.

500mA|
---|---
400mA|
350mA|
300mA|
250mA|
230mA|
195mA|
|

HED1025/8BT, 25W

700mA|
---|---
650mA|
600mA|
550mA|
500mA|
450mA|
400mA|
350mA|
300mA|
|

Warning: Please make sure the correct current is selected before starting the driver!

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz-2.483 GHz
Transmission power| 4.dBm
Range (Typical indoor]| 10~30m
Protocol| Bluetooth 5.0 SIG Mesh

| Model No.| HED1009/BT| HED6010/BT| HED1025/BT| HED1040/BT
---|---|---|---|---|---

Input

| Mains Voltage| 220~240VAC   50/60Hz
Mains Current| 0.065~0.06A| 0.071~0.065A| 0.140~0.125A| 0.210~0.200A
Power Factor| 0.9
Max. Efficiency| 80%| 82%| 85%| 85%

Output

| Ripple Current| <3%| <3%| <3%| <3%
Uout Max.| 45V| 52V| 60V| 65V
Turn-on Time| <0.5s| <0.5s| <0.5s| <0.5s
Dimming Interface| Switch-Dim

Environment

| Operation Temp.| -20 ~ +50℃| -20 ~ +50℃| -20 ~ +50℃| -20 ~ +50℃
Case Temp. (Max.)| 85℃| 75℃| 85℃| 85℃
IP Rating| IP20| IP20| IP20| IP20
Safetyand EMC| EMC Standard| EN55015,   EN61547,   EN61000-3-2/-3-3, EN300328,   EN301489-1/-17,   EN62479
Safety Standard| EN61347-1,  EN61347-2-13
Dielectric strength| Input→output: 3000VAC / 5mA /1min
Abnormal protection| Output short-circuit protection, Overload Protection, Open-circuit Protection

Mechanical Structure & Dimensions

HED1009/8T, 1x9W

HED6010/BT, 1x10W

HED1025/BT, 1x30W

HED1040/BT, 1x40W

Wire Preparation

To make or release the wire from the ferminal, use a ‘/ screwdriver to push down the button

Wiring Diagram

Model: HED1009/BT

Note: There is no need for any hardwirings on “push” ferminal befween one driver fo another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.

Model: HED6010/BT

Note: There is no need for any hardwirings on “push” terminal between one driver fo another. The installer only needs fo connect the push switches to the nearest driver fo save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.

Model: HED1025/BT

Note: There is no need for any hardwirings on “push” terminal between one driver to another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned o control any Bluetooth driver through the app commissioning

Model: HED1040/BT

Note: CH1 & CH2 are working independently, meaning that they cannot be used with luminaires that share “+”. There is no need for any hardwirings on “push” terminal between one driver fo another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.

Loading and In-rush Current

Circuit Breaker Information

Automatic circuit breaker type| B16A| B10A| B13A| B20A| B25A
---|---|---|---|---|---
HED1009/BT| 176| 110| 143| 220| 276
HED6010/BT| 142| 89| 115| 178| 222
HED1025/BT| 73| 46| 59| 92| 115
HED1040/BT| 41| 26| 3| 52| 65

The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 0% of the number calculated, i.e.  6/(Pn/230) x 60%. Please kindly take note that the calculation is based on ABB circuit breaker series $200. Actual values may differ due to different types of circuit breaker used and installation environment.

Performance Characteristics

HED1009/8T

Typical Efficiency vs Load

Typical Power Factor vs Load

Typical Efficiency vs Load

Typical Power Factor vs Load

ypical Efficiency vs Load

Typical Power Factor vs Load

Typical Power Factor vs Load

Dimming Characteristics

Dim level

Dim Level

Dimming Profile

Dimming Interface Operation Notes

Switch-Dim
The provided SwitchDim interface allows for a simple dimming method using commercially available norlatching [momentary) wall switches. Up to 64 LED drivers maybe connected to one switch. Defailed Push switch configurations can be set on Koolmesh app.

• Turn on/off
• Recall a scene
• Turn on only
• Exit manual mode
• Turn off only
• Do nothing

Double push|

• Turn on only
• Exit manual mode
• Turn off only
• Do nothing
• Recall a scene

Long press (≥1 second)|  Dimming-   Do nothing
Simulate sensor| /| Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents

1. Regarding precautions for LED driver installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation

2. To leam more about detailed product features/functions, please refer to
   www.hytronik.com/download>knowledge ->Introduction of App Scenes and Product Functions

3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->Bluetooth Producs – Precautions for Product Installation and Operation

4. Data sheet is subject to change without notice. Please always refer o the most recent release on
   www.hytronik.com /products/bluetooth technology ->Bluetooth Drivers

5. Regarding Hytronik standard guarantee policy, please refer to wwew hytronk com,/download ~>knowdedge >Hytronik Standard Guarantee Policy.

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>