BEGA 33 150 Ceiling Wall Pillar Luminaire Instructions
- June 12, 2024
- BEGA
Table of Contents
BEGA 33 150 Ceiling Wall Pillar Luminaire
Product Information
This product is an unshielded luminaire made of stainless steel. It is designed for installation under ceilings, on walls, pillars, and murals. The luminaire is equipped with a three-ply opal glass that distributes light softly and uniformly over the glass surface. It has a steel grade of 1.4401 and a silicone gasket for protection against dust and splash water. The luminaire has an impact strength of IK03 and a protection class of IP64, making it resistant to mechanical damage and suitable for outdoor use. It weighs 1.6 kg and contains energy-efficient light sources.
Product Usage Instructions
- Ensure that the installation and operation of the luminaire comply with national safety regulations.
- Only a qualified electrician should perform the installation and commissioning of the luminaire.
- Avoid improper use or installation, as it may cause damage for which the manufacturer will not be liable.
- If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
- For additional protection against overvoltage and transients, it is recommended to use separate overvoltage protection components. These components can be found on the manufacturer’s website at www.bega.com.
- The luminaire has a rated temperature and ambient temperature specified. Ensure that these limits are not exceeded during operation.
- The product is available in different module designations, color temperatures, color rendering indexes, module luminous fluxes, luminaire luminous fluxes, and luminaire luminous efficiencies. Choose the appropriate variant based on your requirements.
Dimension
Instructions for use
Application
Unshielded luminaire made of stainless steel for installation under ceilings,
on walls as well as on pillars and murals. By means of the three-ply opal
glass the light is distributed softly and uniformly over the glass surface.
Product description
Luminaire made of stainless steel Steel grade no. 1.4401 Opal glass with screw
neck Silicone gasket 2 mounting holes ø 5.5 mm Distance apart 105 mm 2 cable
entries for through-wiring of mains supply cable ø 7-10.5 mm Connecting
terminal 2.5@ with plug connection Earth conductor connection LED power supply
unit 220-240 V x 0/50-60 Hz DC 176-280 V BEGA Thermal Switch® Temporary
thermal shutdown to protect temperature-sensitive components Safety class
IProtection class IP 64 Dust-tight and protection against splash water Impact
strength IK03 Protection against mechanical impacts < 0.35-joule r – Safety
mark c – Conformity mark Weight: 1.6 kg This product contains light sources of
energy efficiency classes B, C
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve additional protection
against e. g. transients, etc. we recommend separate overvoltage protection
components. You can find them on our website at
www.bega.com.
- Lamp
- Module connected wattage 5.8 W
- Luminaire connected wattage 7 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 40 °C
- Voltage 220-240 V x
- 33 150 K3
- Module designation LED-0297/830
- Colour temperature 3000 K
- Colour rendering index CRI > 80
- Module luminous flux 1125 lm
- Luminaire luminous flux 753 lm
- Luminaire luminous efficiency 107,6 lm / W
- 33 150 K4
- Module designation LED-0297/840
- Colour temperature 4000 K
- Colour rendering index CRI > 80
- Module luminous flux 1160 lm
- Luminaire luminous flux 776 lm
- Luminaire luminous efficiency 110,9 lm / W
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping. Screw out
glass from the luminaire housing. Undo screws and disassemble the mounting
plate – key slots – . Lead the mains supply cable through the cable entry of
the mounting plate.Fix mounting plate with enclosed or any other suitable
fixing material onto the mounting surface. It is absolutely essential to use
the enclosed gaskets. Make earth conductor connection. Push silicone sleeves
over the lines and make electrical connection. Push plug into the coupler up
to the stop.Place the housing onto the mounting plate and fix with screws.
Screw glass with gasket into the luminaire housing. Make sure that gasket is
positioned correctly.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The
light colour and light output of BEGAreplacement modules correspond to those
of the modules originally fitted.The module can be replaced by qualified
persons using standard tools. Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module. Inspect and,
if necessary, replace the luminaire gaskets. Defective glass must be replaced.
Close the luminaire.
Cleaning · Maintenance
After installation, the luminaire should first be cleaned. Building dust,
residues from contact adhesives, paint splashes and rust film must be
completely removed. Never use high pressure cleaners and cleaning implements
made of normal steel, steel brushes or steel wool because they cause
extraneous rust to form.When using stainless steel cleaners, please read the
directions carefully. Cleaning agents containing hydrochloric acid and
chlorides should never be used. We recommend cleaning the luminaires
regularly.
- Spares
- Spare glass with gasket 11 002 732 41
- LED power supply unit DEV-0136/700
- LED module 3000 K LED-0297/830
- LED module 4000 K LED-0297/840
- Gasket glass 83 000 736
- Gasket housing 83 000 755
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com