BEGA 51 084.5 Track Spotlight Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 51 084.5 Track Spotlight
Product Information
Product Usage Instructions
Instructions for use
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 51 084.5 Track Spotlight

Product Information

This product is a track spotlight with an adapter. It features a cast aluminum luminaire housing with a velvet black finish. The track adapter is made of polycarbonate and has an integrated LED power supply unit. The luminaire also includes a safety glass with optical texture and a reflector surface made of pure aluminum. The LED cover is made of light-diffusing synthetic material.

The LED power supply unit operates at 220-240 V and 50/60 Hz. The luminaire is DALI-controllable and has 1 DALI address. It provides basic insulation between the mains and control lines.

This product contains light sources of energy efficiency class(es) E.

Safety
The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer.

Overvoltage Protection
The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components. These components can be found on the manufacturer’s website at www.bega.com.

Technical Specifications

Lamp Module| Connected Wattage| Luminaire Connected Wattage| Rated Temperature| Ambient Temperature| Service Life Criteria
---|---|---|---|---|---
LED-1259/930| 31 W| 36 W| 3000 K| CRI > 90| 4250 lm| 2657 lm| 73.8 lm/W
LED-1259/940| 31 W| 36 W| 4000 K| CRI > 90| 4420 lm| 2763 lm| 76.8 lm/W

Product Usage Instructions

Ensure that the installation and operation of this luminaire comply with national safety regulations.
Only a qualified electrician should carry out the installation and commissioning.
Refer to the manufacturer’s website at www.bega.com for additional overvoltage protection components.
Follow the provided technical specifications for the connected wattage, color temperature, color rendering index, luminous flux, and luminous efficiency.
If modifications are made to the luminaire, take responsibility as the manufacturer and ensure compliance with safety regulations.

Track spotlight for indoor use

BEGA-51-084.5-Track-Spotlight-01

Instructions for use

Application
Ceiling mounted track spotlight · indoor luminaire for 3-phase Eurostandard- Plus® track systems.
The optical system of the washer is swivel-mounted and rotatable.
Symmetrical wide beam light distribution.

Product description

Track spotlight with adapter
Cast aluminum luminaire housing, finish Color velvet black,
Polycarbonate track adapter with integrated LED power supply unit
Safety glass with optical texture
Reflector surface made of pure aluminum Light-diffusing synthetic LED cover
LED power supply unit
220-240 V y 50/60 Hz
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
Safety class II
CE – Conformity mark
Weight: 1.1 kg

This product contains light sources of energy efficiency class(es) E

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 31 W
Luminaire connected wattage 36 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C
Service life criteria 50 000 h / L70

51 084.5 K3

Module designation LED-1259/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 4250 lm
Luminaire luminous flux 2657 lm
Luminaire luminous efficiency 73,8 lm / W

51 084.5 K4

Module designation LED-1259/940
Color temperature 4000 K
Color rendering index CRI > 90
Module luminous flux 4420 lm
Luminaire luminous flux 2763 lm
Luminaire luminous efficiency 76,8 lm / W

Light technique

Track spot · surface washer with adjustable optical system. Optical system 0-340° swivel-mounted and ± 310° infinitely rotatable around the vertical luminaire axis.
Symmetrical wide beam light distribution.
Half beam angle 90°

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
The track spotlight with adapter is ready for operation in 3-phase EUROSTANDARD-PLUS® track systems.
The mounting is done without tools in the bus bar.

IMPORTANT:
Ensure that the adapter’s two lateral stays are located on the same side as the matching guide profile of the track before installing the adapter in the 3-phase EUROSTANDARD-PLUS® track system.
To select the phase ( 1 2 3 ) the turning knob on the rear side of the adapter has to be operated accordingly.
Place the surface washer adapter flush on the conductor rail in the desired position.
Push the two fixing levers on the underside of the adapter to the right until they click into their end position.
Set the desired LED beam direction by turning and tilting the luminaire housing.
Move the two fixing levers in opposite directions until they disengage to unlock the adapter.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system and open the luminaire. Uninstall the reflector.
Please follow the installation instructions for the LED module.
Install the reflector. Defective glass must be replaced. Close the luminaire.

Spares