BEGA 89010 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

BEGA 89010 Ceiling and Wall Luminaire for Indoor Use

Product Information

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Usage Instructions

1. The installation and operation of this luminaire are subject to national safety regulations.
2. Installation and commissioning should only be carried out by a qualified electrician.
3. The manufacturer does not accept liability for damage caused by improper use or installation.
4. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Spare Parts

DIMENSIONS

Instructions for use

Application

• Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt, and metal housing, for all lighting tasks.
• They are ideal for places where a soft and uniform lighting distribution is required.
• Luminaire with a high protection class.

Lamp

• Luminaire with screw base E 27
• Lamp output max. 75 W
• This product contains light sources of energy efficiency class E Supplied lamp
• BEGA LED lamp 13548
• LED Retrofit 7 W · 805 lm · 2700 K dimmable
• Supplied lamp
• BEGA LED lamp 13586
• LED Retrofit 7 W · 805 lm · 3000 K dimmable
• Luminaire efficiency: 69%
• Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

• Aluminum alloy housing, finish Colour white
• Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 5.5 mm
• Distance apart 130 mm
• 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@ Connection terminal 2.5@
• Earth conductor connection
• Lampholder E 27
• Safety class I
• Protection class IP 44
• Protected against granular foreign bodies ≥ 1 mm and splash water
• Impact strength IK02
• Protection against mechanical impacts < 0.2 joule
•  – Safety mark
•  – Conformity mark
• Weight: 1.3 kg

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

• Lead mains supply cable through the cable entry into the luminaire housing.
• Notice the position of the application »arrow down« when installed on the wall.
• Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
• It is imperative to use the enclosed gaskets.
• Make an earth conductor connection.
• Push silicone sleeves over the lines and make an electrical connection.
• Insert lamp.
• Place glass in the luminaire housing and observe that the holding spring bolts fit into the notches of the glass.
• Turn the glass clockwise until it is locked.
• Thus, you reach a safe and vibration-resistant holding of the glass.
• To release the glass from the luminaire housing, turn it counterclockwise.

Relamping · Maintenance

• Disconnect the electrical installation.
• To release the glass from the housing, turn it counterclockwise.
• Clean luminaire and glass.
• Use only solvent-free cleansers.
• Change the lamp.
• The sliding-bolt closure provides a safe and vibration-resistant holding of glass.
• Place glass to the housing and observe that the holding spring bolts fit into the notches of the glass.
• Turn the glass clockwise until it is locked.

Spares

• Spare glass 11 002 401 .0R G
• LED lamp 2700 K 13 548
• LED lamp 3000 K 13 586
• Lampholder 63 000 187
• Reflector 76 000 678

BEGA Gantenbrink-Leuchten KG

• Postfach 31 60
• 58689 Menden
• info@bega.com
• www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>