BEGA 50127.1 Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50127.1 Wall Luminaire for Indoor Use
Product Information
Product Usage Instructions
DIMENSION
Instructions for use
Safety
Installation
Cleaning Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50127.1 Wall Luminaire for Indoor Use

Product Information

This product is a metal housing luminaire with a white finish. It features a hand-blown opal glass with a satin matt surface. The luminaire comes with a mounting plate that has 2 fixing points and an earth conductor connection. It is equipped with a 2-pole connecting terminal for digital control and a LED power supply unit that operates at 220-240 V x 0/50-60 Hz DC 176-276 V. The luminaire is DALI-controllable and has 1 DALI address. It also has basic insulation provided between the mains and control cables. The weight of the luminaire is 2.5 kg.

This product contains light sources of energy efficiency class(es) D. The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. However, for additional protection against transients and other voltage surges, it is recommended to use separate overvoltage protection components.

The luminaire has a lamp module connected wattage of 19.2 W and a luminaire connected wattage of 22.3 W. The rated temperature and ambient temperature are not specified in the provided text.

The module designation for the included LED is LED-0574/930 with a color temperature of 3000 K. It has a color rendering index (CRI) greater than 90. The module luminous flux is 3220 lm, while the luminaire luminous flux is 1980 lm. The luminaire has a luminous efficiency of 88.8 lm/W.

Product Usage Instructions

The installation and operation of this luminaire should be carried out in accordance with national safety regulations. Only a qualified electrician should perform the installation and commissioning.
Ensure that the luminaire is properly connected to the earth conductor for safety.
To protect the electronic components from transient events, it is recommended to use separate overvoltage protection components. More information can be found on the manufacturer’s website at www.bega.com.
When handling the luminaire, avoid direct contact with the LEDs and do not remove any LED components from the luminaire.

DIMENSION

Instructions for use

Application

Free-radiating wall wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing.
The character of the three-ply opal glass creates a smooth and uniform light distribution in the room.

Product description

Metal housing, finish Colour white
Hand-blown opal glass, satin matt
Mounting plate with 2 fixing holes ø 5.5 mm · 80 mm spacing 2 cable entries for through-wiring for mains cable up to ø 10,5 mm max. 5 x 1.5@ Connection terminal 2.5@
Earth conductor connection 2-pole connecting terminal for digital control
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
- r – Safety mark
- c – Conformity mark
- Weight: 2.5 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at: www.bega.com.

Lamp

Module connected wattage 19.2 W
Luminaire connected wattage 22.3 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

50 127.1 K3

Module designation 2x LED-0574/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 3220 lm
Luminaire luminous flux 1980 lm
Luminaire luminous efficiency 88,8 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Take off glass from luminaire base.
Loosen earth conductor connection between LED unit and luminaire base (plug connection). Loosen knureld head screws of the LED-unit and remove them.
Remove the LED unit from the luminaire base. Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied. Notice position of use “arrow down” of the luminaire base.
Fix LED-unit hand-tight with both knurled head screws onto luminaire base.
Make earth conductor connection between LED unit and luminaire base (plug connection). Establish earth conductor connection and make the electrical connection to the terminals. For digital control please use the connecting terminal
DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
Insert glass into luminaire base.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Close the luminaire.

Spares